HN-Sound /PA-Chassis/Lautsprecher 6"Artikel

18 Sound 6NMB420 114,00 EUR

SMALL SPECIFICATIONS

100 dB SPL 1W / 1m average sensitivity

44 mm (1 3/4 in) voice coil

200 W continuous pink noise power handling

External neodymium magnet assembly

Single Demodulating Rings (SDR) for lower distortion

Weather protected cone and plates for outdoor usage

Improved heat dissipation via Active Cooling System

Specially designed for line arrays and compact two way systems

GENERAL SPECIFICATIONS
Nominal Diameter	152mm (5,98 in)
Rated Impedance	8 Ohm
Continuous Pink Noise (1)	200 W
Continuous Power (2)	130 W
Program Power (3)	260 W
Peak Power (4)	500 W
Sensitivity (5)	100 dB
Frequency Range (6)	200 � 7000 Hz
Power Compression @-10dB (7)	(13 W) 0,9 dB
Power Compression @-3dB	(65 W) 1,6 dB
Power Compression @Full Power	(130 W) 2,9 dB
Max Recomm. Frequency	3500 Hz
Recomm. Enclosure Volume	2 � 6 lt. (0,07 � 0,21 cuft)
Minimum Impedance	6,2 Ohm at 25�C
Max Peak To Peak Excursion	14 mm (0,55 in)
Voice Coil Diameter	44 mm (1,73 in)
Voice Coil Winding Material	aluminum

THIELE SMALL PARAMETERS (8)
Fs	110 Hz
Re	5,3 Ohm
Sd	0,013 sq.mt. (20,15 sq.in.)
Qms	2,7
Qes	0,38
Qts	0,33
Vas	6,1 lt. (0,22 cuft)
Mms	8,5 gr. (18,76 lb)
BL	9 Tm
Linear Mathematical Xmax (9)	� 3 mm (�0,12 in)
Le (1kHz)	0,1 mH
Ref. Efficiency 1W@1m (half space)	95,1 dB

MOUNTING INFORMATIONS
Overall diameter	162 mm (6,38 in)
N. of mounting holes	4
Mounting holes diameter	5,5 mm (0,22 in)
Bolt circle diameter	170 mm (6,69 in)
Front mount baffle cutout �	148 mm (5,38 in)
Rear mount baffle cutout �	148 mm (5,38 in)
Total depth	73 mm (2,83 in)
Flange and gasket thickness	11,5 mm (0,45 in)
Net weight	1,25 kg (2,76 lb)
Shipping weight	1,8 kg (3,97 lb)
CardBoard Packaging dimensions	170 x 170 x 80 mm (6,69 x 6,69 x 3,15 in)

The 6NMB420 is a neodymium midbass transducer designed for low frequency reproduction in 3-way systems or multiway systems where both low weight and high intelligibility are required.
When compared to our 6ND410 state-of-the-art midrange transducer, 6NMB420 offers a lower frequency resonance and a longer linear Xmax value; this drives to an increased output around 250Hz, with a consequent slightly reduced output above 700Hz.
It is suitable as mid-bass in 3 way systems or multiple way systems with high-pass crossover above 200 Hz and low-pass up to 3kHz; enclosure might be closed or vented with volume size starting from 2 lit.
The speaker offers a superb linearity: distortion values are furtherly minimized by new enhanced design criterias, developed by Eighteen Sound engineers, taking the 6NMB420 to very high level of performance.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio.
A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure.
Particular efforts were dedicated to the surround shape and material design in order to minimize the resonances on mid range frequencies. The triple roll design offers a consistent damping to typical bell modes.
The 44 mm voice coil is made of light-weight aluminum wire and assures linearity and high power handling.
Thanks to the increasing use during outdoor audio events, the ability to perform in humid environments is a key feature of the 6NMB420. This is achieved trough an exclusively developed cone treatment which render the cone humidity repellent while it does not increase total moving mass.

18 Sound 6ND410 100,00 EUR

SMALL SPECIFICATIONS

102 dB SPL 1W / 1m average sensitivity

45 mm (1,77 in) edgewound aluminum voice coil

180 W continuous pink noise power handling

Neodymium motor assembly

Extremely high sound quality

Very shallow profile, 58 mm (2,3 in)

GENERAL SPECIFICATIONS
Nominal Diameter	152mm (6 in)
Rated Impedance	8 Ohm
Continuous Pink Noise (1)	180 W
Continuous Power (2)	120 W
Program Power (3)	240 W
Peak Power (4)	480 W
Sensitivity (5)	102 dB
Frequency Range (6)	200 � 8000 Hz
Power Compression @-10dB (7)	(12 W) 0,7 dB
Power Compression @-3dB	(60 W) 1,2 dB
Power Compression @Full Power	(120 W) 1,6 dB
Max Recomm. Frequency	5000 Hz
Recomm. Enclosure Volume	1 � 5 lt. (0,04 � 0,18 cuft)
Minimum Impedance	8,2 Ohm at 25�C
Max Peak To Peak Excursion	8 mm (0,31 in)
Voice Coil Diameter	45 mm (1,77 in)
Voice Coil Winding Material	aluminum
Polarity	positive voltage on red terminal gives forward cone motion

THIELE SMALL PARAMETERS (8)
Fs	120 Hz
Re	5,9 Ohm
Sd	0,0143 sq.mt. (20,6 sq.in.)
Qms	2,2
Qes	0,27
Qts	0,24
Vas	6,2 lt. (0,22 cuft)
Mms	8,2 gr. (0,02 lb)
BL	11,6 Tm
Linear Mathematical Xmax (9)	� 2 mm (�0,08 in)
Le (1kHz)	0,67 mH
Ref. Efficiency 1W@1m (half space)	97,9 dB

MOUNTING INFORMATIONS
Overall diameter	162 mm (6,38 in)
N. of mounting holes	4
Mounting holes diameter	5,5 mm (0,22 in)
Bolt circle diameter	170 mm (6,69 in)
Front mount baffle cutout �	148 mm (5,38 in)
Rear mount baffle cutout �	148 mm (5,38 in)
Total depth	60 mm (2,3 in)
Flange and gasket thickness	9,5 mm (0,37 in)
Net weight	1,25 kg (2,76 lb)
Shipping weight	1,8 kg (3,97 lb)
CardBoard Packaging dimensions	170 x 170 x 80 mm (6,69 x 6,69 x 3,15 in)

The 6ND410 is a very high output, state-of-the-art midrange product for high quality professional use. The high level of sound quality has been achieved thanks to extensive research by Eighteen Sound engineers which focused on implementing mid frequencies intelligibility.
The 6ND410 can be used as a midrange in both horn and direct radiation, closed or reflex enclosures, as small as 2 liters. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. Consequently, the levels of force factor and power handling are at a top professional level with an optimum power to weight ratio. A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure. The curvilinear cone-surround, has been created using computer aided vibrational modelling software to move all undesired bell modes out of the usable frequency range.
The 45 mm edge-wound voice coil assembly and terminals have been designed to minimise the moving mass while reinforcing force transmission.
The 3 threaded back plate holes give the final user the opportunity to insert an external customised heat sink, if further heat dissipation is required.
A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 6ND410 far more resistant to the corrosive effects of salts and oxidization.

18 Sound 6ND430 105,00 EUR

SMALL SPECIFICATIONS

92,5 dB SPL 1W / 1m average sensitivity

45 mm (1,77 in) aluminum voice coil

200 W continuous pink noise power handling

Neodymium motor assembly

Weather protected cone

Ideal for compact two way and multiway systems

Improved heat dissipation via unique basket design

GENERAL SPECIFICATIONS
Nominal Diameter	152mm (6 in)
Rated Impedance	16 Ohm
Continuous Pink Noise (1)	200 W
Continuous Power (2)	130 W
Program Power (3)	260 W
Peak Power (4)	500 W
Sensitivity (5)	92,5 dB
Frequency Range (6)	63 � 5500 Hz
Power Compression @-10dB (7)	(13 W) 1,0 dB
Power Compression @-3dB	(65 W) 1,5 dB
Power Compression @Full Power	(130 W) 2,9 dB
Max Recomm. Frequency	3000 Hz
Recomm. Enclosure Volume	10 � 40 lt. (0,35 � 1,41 cuft)
Minimum Impedance	12,4 Ohm at 25�C
Max Peak To Peak Excursion	22 mm (0,87 in)
Voice Coil Diameter	45 mm (1,77 in)
Voice Coil Winding Material	aluminum
Polarity	positive voltage on red terminal gives forward cone motion

THIELE SMALL PARAMETERS (8)
Fs	63 Hz
Re	11 Ohm
Sd	0,0133 sq.mt. (20,6 sq.in.)
Qms	6,3
Qes	0,42
Qts	0,39
Vas	13,4 lt. (0,47 cuft)
Mms	12,5 gr. (0,03 lb)
BL	11,4 Tm
Linear Mathematical Xmax (9)	� 5 mm (�0,20 in)
Le (1kHz)	1,47 mH
Ref. Efficiency 1W@1m (half space)	91 dB

MOUNTING INFORMATIONS
Overall diameter	162 mm (6,38 in)
N. of mounting holes	4
Mounting holes diameter	5,5 mm (0,22 in)
Bolt circle diameter	170 mm (6,69 in)
Front mount baffle cutout �	148 mm (5,38 in)
Rear mount baffle cutout �	148 mm (5,38 in)
Total depth	73 mm (2,87 in)
Flange and gasket thickness	9,5 mm (0,37 in)
Net weight	1,25 kg (2,76 lb)
Shipping weight	1,8 kg (3,97 lb)
CardBoard Packaging dimensions	170 x 170 x 80 mm (6,69 x 6,69 x 3,15 in)

The 6ND430 is neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required.
The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and mid frequencies are required such as studio monitoring applications. It is also currently used in line array or multiway systems with excellent results.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at a top professional level with an optimum power to weight ratio.
A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure.
Particular effort was given to the surround shape and material design in order to minimise the resonances on mid range frequencies. The new design, realised with specified rubber based material density, offers a consistent dampening to typical bell modes.
The 45 mm voice coil is made from a light-weight aluminum wire and assures linearity and high power handling.
A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 6ND430 far more resistant to the corrosive effects of salts and oxidization.

B&C 6NDL38 Chassis 89,00 EUR

38 mm (1.5 in) copper voice coil

70 - 6000 Hz response

92 dB sensitivity

Neodymium magnet allows a very light yet powerful motor assembly

Aluminium demodulating ring allows a very low distortion figure

300 W continuous program power capacity

Specifications

Nominal Diameter 170 mm (6.5 in)

Nominal Impedance 8 ohm

Minimum Impedance 6 ohm

Nominal Power Handling 150 W

Continuous Power Handling 300 W

Sensitivity (1W/1m) 92 dB

Frequency Range 70 - 6000 Hz

Voice Coil Diameter 38 mm (1.5 in)

Winding Material Copper

Former Material Kapton

Winding Depth 12 mm (0.5 in)

Magnetic Gap Depth 6 mm (0.25 in)

Flux Density 1.15 T

Parameters

Fs 72 Hz

Re 5.2 ohm

Qes 0.44

Qms 11.5

Qts 0.42

Vas 7 dm3 (0.25 ft3)

Sd 132 cm2 (20.50 in2)

η0 0.6 %

Xmax 6 mm

Xvar 5.5 mm

Mms 17 g

Bl 9.5 Txm

Le 0.6 mH

Mounting and Shipping info

Overall Diameter 187 mm (7.4 in)

Bolt Circle Diameter 172 mm (6.7 in)

Baffle Cutout Diameter 145 mm (5.7 in)

Depth 85 mm (3.3 in)

Flange and Gasket Thickness 11 mm (0.4 in)

Net Weight 1.2 kg (2.6 lb)

Shipping Weight 6.1 kg (13.4 lb)

Shipping Box 405x225x210 mm (15.9x8.8x8.3 in)

Design

Surround Shape Roll

Cone Shape Exponential

Magnet Type Neodymium Ring

Spider Single

Pole Design T-Pole

Waterproof WP

Demodulating Ring Yes

B&C 6MDN44 Chassis 94,00 EUR

300 W continuous program power capacity

44 mm (1.7 in) aluminium voice coil

150 - 6000 Hz response

96.5 dB sensitivity

Specifications

Nominal Diameter 170 mm (6.5 in)

Nominal Impedance 8 ohm

Minimum Impedance 6.5 ohm

Nominal Power Handling 150 W

Continuous Power Handling 300 W

Sensitivity (1W/1m) 97 dB

Frequency Range 150 - 6000 Hz

Voice Coil Diameter 44 mm (1.7 in)

Winding Material Aluminium

Former Material Glass Fibre

Winding Depth 9.5 mm (0.37 in)

Magnetic Gap Depth 6 mm (0.25 in)

Flux Density 1.45 T

Parameters

Fs 140 Hz

Re 5.4 ohm

Qes 0.46

Qms 2.8

Qts 0.4

Vas 2.7 dm3 (0.09 ft3)

Sd 132 cm2 (20.50 in2)

η0 1.6 %

Xmax 2.5 mm

Xvar 3 mm

Mms 11 g

Bl 11 Txm

Le 0.47 mH

Mounting and Shipping info

Overall Diameter 187 mm (7.4 in)

Bolt Circle Diameter 172 mm (6.7 in)

Baffle Cutout Diameter 145 mm (5.7 in)

Depth 73 mm (2.9 in)

Flange and Gasket Thickness 11 mm (0.4 in)

Net Weight 1 kg (2.2 lb)

Shipping Weight 5.3 kg (11.7 lb)

Shipping Box 405x225x210 mm (15.9x8.8x8.3 in)

Design

Surround Shape Triple Roll

Cone Shape Exponential

Magnet Type Neodymium Ring

Spider Single

Pole Design T-Pole

Waterproof WP

Ventilation V.C. Gap Yes

Demodulating Ring Yes

Eminence Lina Array 6CBMR 6'' 150W 8 Ohm 65,00 EUR

Line Arrays

Recommended for professional audio midrange from 500Hz-3kHz. Basket is closed. Truncated basket for close
spacing in line-arrays.

SPECIFICATION

Nominal Basket Diameter 6.5", 165mm
Nominal Impedance* 8 ohms
Power Rating** Watts 150W / Music Program 300W
Resonance 460Hz
Usable Frequency Range*** 500Hz-5.4kHz
Sensitivity 97.8
Magnet Weight 38 oz.
Gap Height 0.31", 7.92mm
Voice Coil Diameter 1.5", 38.1mm

THIELE & Small Parameters

Resonant Frequency (fs) 460Hz
DC Resistance (Re) 6.3
Coil Inductance (Le) 0.33mH
Mechanical Q (Qms) 3.13
Electromagnetic Q (Qes) 1.24
Total Q (Qts) 0.89
Compliance Equivalent Volume (Vas) 0.4 liters / 0.01 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 2.7cc
Mechanical Compliance of Suspension (Cms) 0.01mm/N
BL Product (BL) 11.1 T-M
Diaphragm Mass inc. Airload (Mms) 9 grams
Efficiency Bandwidth Product (EBP) 371
Maximum Linear Excursion (Xmax) 0.2mm
Surface Area of Cone (Sd) 133.1 cm2
Maximum Mechanical Limit (Xlim) 0.8mm

MOUNTING Information

Recommended Enclosure Volume
Sealed N/A
Vented N/A
Overall Diameter 6.59", 167mm/Width
Baffle Hole Diameter 5.65", 143.5mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket as standard
Mounting Holes Diameter 0.23", 5.7mm
Mounting Holes B.C.D. 6.06", 154mm
Depth 2.77", 70mm
Net Weight 6.7 lbs., 3 kg
Shipping Weight 7.2 lbs., 3.3 kg

MATERIAL of Construction

Copper voice coil
Polyimide former
Ferrite magnet
Vented and extended core
Pressed steel basket with truncated sides
Paper Cone
Cloth cone edge
Solid composition paper dust cap

ALPHA-6 6'' 100W 8 Ohm - Blechkorb 39,00 EUR

ALPHA- Serie 100W- 200W

Recommended for professional audio mid-range applications in a sealed cabinet, or as a mid-bass in a vented
satellite enclosure.

SPECIFICATION

Nominal Basket Diameter 6.5", 165mm
Nominal Impedance* 8 ohms
Power Rating** Watts 100W / Music Program 200W
Resonance 118Hz
Usable Frequency Range*** 85Hz-6kHz
Sensitivity 93.6
Magnet Weight 20 oz.
Gap Height 0.25", 6.35mm
Voice Coil Diameter 1.5", 38.1mm

THIELE & Small Parameters

Resonant Frequency (fs) 118Hz
DC Resistance (Re) 7.2
Coil Inductance (Le) 0.19mH
Mechanical Q (Qms) 5.68
Electromagnetic Q (Qes) 0.60
Total Q (Qts) 0.54
Compliance Equivalent Volume (Vas) 5.8 liters / 0.2 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 44cc
Mechanical Compliance of Suspension (Cms) 0.26mm/N
BL Product (BL) 8.0 T-M
Diaphragm Mass inc. Airload (Mms) 7 grams
Efficiency Bandwidth Product (EBP) 197 Maximum Linear Excursion (Xmax) 3.5mm
Surface Area of Cone (Sd) 126.7 cm2
Maximum Mechanical Limit (Xlim) 4.0mm

MOUNTING Information

Recommended Enclosure Volume
Sealed 2.8-5.7 liters / 0.1-0.2 cu. ft.
Vented 3.4-15.6 liters / 0.12-0.55 cu. ft.
Overall Diameter 6.59", 167.4mm
Baffle Hole Diameter 5.69", 144.5mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket fitted as standard
Mounting Holes Diameter 0.23", 5.7mm
Mounting Holes B.C.D. 6.06", 154mm
Depth 2.8", 71mm
Net Weight 4.1 lbs., 1.9 kg
Shipping Weight 4.8 lbs., 2.2 kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Ferrite magnet
Vented and extended core
Pressed steel basket
Paper Cone
Cloth cone edge
Solid composition paper dust cap