HN-Sound /PA-Chassis/Lautsprecher 10"Artikel

18 Sound 10NMB420 179,00 EUR

SMALL SPECIFICATIONS

99 dB SPL 1W / 1m average sensitivity

65 mm (2.5 in) Interleaved Sandwich Voice coil (ISV)

350 W continuous pink noise power handling

External neodymium magnet assembly

Single Demodulating Ring (SDR) for lower distortion

Weather protected cone and plates for outdoor usage

Specially designed for line arrays and compact two way systems

GENERAL SPECIFICATIONS
Nominal Diameter	260mm (10,2 in)
Rated Impedance	16 Ohm
Continuous Pink Noise (1)	350 W
Continuous Power (2)	250 W
Program Power (3)	500 W
Peak Power (4)	1000 W
Sensitivity (5)	99 dB
Frequency Range (6)	65 � 5000 Hz
Power Compression @-10dB (7)	(25 W) 0,8 dB
Power Compression @-3dB	(125 W) 2,2 dB
Power Compression @Full Power	(250 W) 2,9 dB
Max Recomm. Frequency	2000 Hz
Recomm. Enclosure Volume	10 � 40 lt. (0,35 � 1,41 cuft)
Minimum Impedance	11,9Ohm at 25�C
Max Peak To Peak Excursion	25 mm (1 in)
Voice Coil Diameter	65 mm (2,56 in)
Voice Coil Winding Material	aluminum

THIELE SMALL PARAMETERS (8)
Fs	65 Hz
Re	10,5 Ohm
Sd	0,0346 sq.mt. (53,6 sq.in.)
Qms	4,6
Qes	0,36
Qts	0,33
Vas	30 lt. (1,06 cu.ft.)
Mms	31,5 gr. (0,07 lb)
BL	19,5 Tm
Linear Mathematical Xmax (9)	� 4 mm (�0,16 in)
Le (1kHz)	0,4 mH
Ref. Efficiency 1W@1m (half space)	96 dB

MOUNTING INFORMATIONS
Overall diameter	260 mm (10,24 in)
N. of mounting holes	8
Mounting holes diameter	7 mm (0,27 in)
Bolt circle diameter	244 mm (9,6 in)
Front mount baffle cutout �	232 mm (9,1 in)
Rear mount baffle cutout �	232 mm (9,1 in)
Total depth	122 mm (4,8 in)
Flange and gasket thickness	11 mm (0,43 in)
Net weight	3 kg (6,6 lb)
Shipping weight	3,5 kg (7,7 lb)
CardBoard Packaging dimensions	275 x 275 x 164 mm (9,25 x 9,25 x 5,91 in)

The 10NMB420 neodymium transducer has been developed in response to a specific market requirement for a 10� midbass driver that combines excellent linearity with good efficiency and high power handling capabilities.
The 10NMB420 is primarily intended for use as a midbass driver in line-arrays as well as high quality 2-way or multiway reflex enclosures. The low pass filter might be positioned as high as 2000Hz.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio.
The 65mm � state-of-the-art, aluminum wire voice coil employs Interleaved Sandwich Voice coil (ISV) technology. It is composed by a high strength fiberglas former used to carry windings on both the outer and inner surfaces, in order to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high BL force factor.
The voice coil is cooled through airways placed between the chassis back plate and the magnet faceplate. In this way heated air is channeled away from the voice coil and the gap.
Another technology present into the 10NMB420 is the SDR (Single Demodulating Ring), used to reproduce instantaneous peak on mid frequencies, reducing intermodulation distortion.
Thanks to the increasing use during outdoor audio events, the ability to perform in humid environments is an extra key feature of the 10NMB420. This is achieved trough an exclusively developed cone treatment which renders the cone humidity repellent while does not increasing the total moving speaker mass.

18 Sound 10NDA520 198,00 EUR

SMALL SPECIFICATIONS

99,5 dB SPL 1W / 1m average sensitivity (AIC on)

65 mm (2,5 in) Interleaved Sandwich Voice coil (ISV)

300 W continuous pink noise power handling

Neodymium motor assembly

AIC (Active Impedance Control) technology

Extremely high sound quality

Humidity resistant

GENERAL SPECIFICATIONS
Nominal Diameter	260mm (10 in)
Rated Impedance	6 Ohm
Continuous Pink Noise (1)	300W
Continuous Power (2)	220W
Program Power (3)	450W
Peak Power (4)	900W
Sensitivity (5)	99,5dB
Frequency Range (6)	60 - 6500 Hz
Power Compression @-10dB (7)	(22 W) 0,7 dB
Power Compression @-3dB	(110 W) 2,5 dB
Power Compression @0dB	(220 W) 3,9 dB
Max Recomm. Frequency	2000 Hz
Recomm. Enclosure Volume	10 � 40 lt. (0,90 � 1,41 cuft)
Minimum Impedance	6,5 Ohm at 25�C
Max Peak To Peak Excursion	22 mm (0,87 in)
Voice Coil Diameter	65 mm (2,5 in)
Voice Coil Winding Material	aluminum
Polarity	positive voltage on red terminal gives forward cone motion

THIELE SMALL PARAMETERS (8)
Fs	63 Hz
Re	5,1 Ohm
Sd	0,035 sq.mt. (54,25 sq.in.)
Qms	7,1
Qes	0,27
Qts	0,26
Vas	38 lt. (1,34 cu ft)
Mms	29 gr. (0,06 lb)
BL	14,6 Tm
Linear Mathematical Xmax (9)	�4 mm (�0,16 in)
Le (1kHz)	0,05 mH (AIC on) - 0,47mH (AIC off)
Ref. Efficiency 1W@1m (half space)	97,6 dB

MOUNTING INFORMATIONS
Overall diameter	260 mm (10,24 in)
N. of mounting holes and bolt	4 on diam. 275 mm (4 on 10,83 in) 8 on diam. 244,5 mm (4 on 9,63 in)
Mounting holes diameter	7,15 mm (0,28 in)
Front mount baffle cutout �	232 mm (9,13 in)
Rear mount baffle cutout �	232 mm (9,13 in)
Total depth	104 mm (4,09 in)
Flange and gasket thickness	14,5 mm (0,57 in)
Net weight	3 kg (6,67 lb)
Shipping weight	3,57 kg (7,88 lb)
CardBoard Packaging dimensions	275 x 275 x 164mm (10,83 x 10,83 x 6,46 in)

The 10NDA520 is a 10" mid-bass transducer created for compact reflex 2-way enclosures. It can be coupled with 1" compression drivers and it can also be used in mid-low sections on modern line-array systems.
Its features and design characteristics make it extremely defined in mid-range frequencies, offering a significant and consistent bottom-end. This also makes it suitable for monitoring applications.
The 10NDA520 incorporates our proprietary Active Impedance Control technology (AIC), consisting of an additional coil fixed on the pole piece and connected in parallel to the moving coil.
The magnetic field generated by AIC coil has the following effects:
1) Impedance linearization
2) Acoustic and electric phase linearization
3) Significant increase of sensitivity and total SPL
4) Total harmonic distortion reduction
5) Constant power transfer
By not absorbing the moving coil�s electromagnetic energy, the AIC offers substantial advantages to the sound quality.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The overall result is the best power to weight ratio available on the market today.
The curvilinear cone, specified with a high damping wood pulp has been designed to achieve the best possible linearity within its frequency range. The in-house developed cone treatment is a humidity repellent and significantly dampens bell-mode resonances.
The 65mm edge-wound voice coil assembly is wound on a strong fiberglas former in order to improve force transmission and power handling.
A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 10NDA520 far more resistant to the corrosive effects of salts and oxidization.

18 Sound 10NDA610 295,00 EUR

SMALL SPECIFICATIONS

103 dB SPL 1W / 1m average sensitivity (AIC on)

75 mm (3 in) Interleaved Sandwich Voice coil (ISV)

400 W continuous pink noise power handling

Neodymium motor assembly

A.I.C. (Active Impedance Control) technology

Extremely high sound quality

Very shallow profile, 90 mm (3,5 in)

Humidity resistant

GENERAL SPECIFICATIONS
Nominal Diameter	260mm (10 in)
Rated Impedance	8 Ohm
Continuous Pink Noise (1)	400W
Continuous Power (2)	300W
Program Power (3)	600W
Peak Power (4)	1200W
Sensitivity (5)	103dB
Frequency Range (6)	100 - 6100 Hz
Power Compression
Power Compression @-10dB (7)	(30W) 0,5 dB
Power Compression @-3dB	(150W) 1,5 dB
Power Compression @Full Power	(300W) 2,1 dB
Max Recomm. Frequency	4000 Hz
Recomm. Enclosure Volume	4 � 15 lt. (0,14 � 0,53 cuft)
Minimum Impedance	6,5 Ohm at 25�C
Max Peak To Peak Excursion	13 mm (0,51 in)
Voice Coil Diameter	75 mm (2,95 in)
Voice Coil Winding Material	aluminum
Polarity	positive voltage on red terminal gives forward cone motion

THIELE SMALL PARAMETERS (8)
Fs	89 Hz
Re	5,5 Ohm
Sd	0,035 sq.mt. (54,25 sq.in.)
Qms	7,1
Qes	0,24
Qts	0,23
Vas	18 lt. (0,64 cuft)
Mms	30 gr. (0,07 lb)
BL	20,3 Tm
Linear Mathematical Xmax (9)	�2,5 mm (� 0,10 in)
Le (1kHz)	0,06 mH
Ref. Efficiency 1W@1m (half space)	98 dB

MOUNTING INFORMATIONS
Overall diameter	260 mm (10,24 in)
N. of mounting holes and bolt	4 on diam. 275 mm (4 on 10,83 in) 8 on diam. 244,5 mm (4 on 9,63 in)
Mounting holes diameter	7,15 mm (0,28 in)
Front mount baffle cutout �	232 mm (9,13 in)
Rear mount baffle cutout �	232 mm (9,13 in)
Total depth	96 mm (3,78 in)
Flange and gasket thickness	14,5 mm (0,57 in)
Net weight	3,5 kg (7,7 lb)
Shipping weight	3,9 kg (8,58 lb)
CardBoard Packaging dimensions	275 x 275 x 164 mm(10,83 x 10,83 x 6,46 in)

The 10NDA610 is a high power, very high output, state-of-the-art midrange transducer for high quality professional use. The high level of sound reproduction is achieved thanks to extensive research by Eighteen Sound engineers, which focused on implementing mid frequencies intelligibility.
The 10NDA610 is ideally used as a midrange in both horn and direct radiation, closed or reflex enclosures, as small as 4 liters. The 10NDA610 incorporates an Active Impedance Control (A.I.C.) consisting of an additional coil fixed on the pole piece and connected in parallel to the moving coil.
The magnetic field generated by this coil has the following effects:
1) Impedance linearization
2) Acoustic and electric phase linearization
3) Significant increase of sensitivity and total SPL
4) Total harmonic distortion reduction
5) Constant power transfer
The A.I.C. offers substantial advantages to the sound quality by not absorbing the moving coil�s electromagnetic energy.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are consequently at a top professional level, with the best power to weight ratio on the market today.
The curvilinear cone, made with a high damping wood pulp, has been designed to achieve the best possible linearity within its frequency range. The in-house developed cone treatment acts as humidity repellent and significantly dampens bell mode resonances. The 75mm edge-wound voice coil assembly is wound on a strong fiberglas former to improve force transmission and power handling.
A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 10NDA610 far more resistant to the corrosive effects of salts and oxidization.

18 Sound 10W400 125,00 EUR

SMALL SPECIFICATIONS

98 dB SPL 1W / 1m average sensitivity

51 mm (2 in) Interleaved Sandwich Voice coil (ISV)

280 Watt continuous pink noise power handling

Ideal for compact two way and multiway systems

Improved heat dissipation via unique basket design

GENERAL SPECIFICATIONS
Nominal Diameter	260 mm (10 in)
Rated Impedance	8 Ohm
Continuous Pink Noise (1)	280 W
Continuous Power (2)	200 W
Program Power (3)	400 W
Peak Power (4)	800 W
Sensitivity (5)	98 dB
Frequency Range (6)	55 � 4500 Hz
Power Compression @-10dB (7)	(20 W) 0,7 dB
Power Compression @-3dB	(100 W) 1,4 dB
Power Compression @Full Power	(200 W) 2,8 dB
Max Recomm. Frequency	2500 Hz
Recomm. Enclosure Volume	20 � 50 lt. (0,71 � 1,77 cuft)
Minimum Impedance	6,1 Ohm at 25�C
Max Peak To Peak Excursion	24 mm (0,94 in)
Voice Coil Diameter	51 mm (2,00 in)
Voice Coil Winding Material	aluminum
Polarity	positive voltage on red terminal gives forward cone motion

THIELE SMALL PARAMETERS (8)
Fs	70 Hz
Re	5,1 Ohm
Sd	0,035 sq.mt. (54,25 sq.in.)
Qms	3,99
Qes	0,44
Qts	0,4
Vas	31 lt. (1,10 cuft)
Mms	27 gr. (0,06 lb)
BL	11,7 Tm
Linear Mathematical Xmax (9)	� 5,5 mm (� 0,22 in)
Le (1kHz)	1,2 mH
Ref. Efficiency 1W@1m (half space)	96 dB

MOUNTING INFORMATIONS
Overall diameter	260 mm (10,24 in)
N. of mounting holes	8
Mounting holes diameter	7,15 mm (0,28 in)
Bolt circle diameter	244,5 mm (9,63 in)
Front mount baffle cutout �	232 mm (9,13 in)
Rear mount baffle cutout �	232 mm (9,13 in)
Total depth	121,5 mm (4,78 in)
Flange and gasket thickness	14,5 mm (0,57 in)
Net weight	4,7 kg (10,38 lb)
Shipping weight	5,10 kg (11,26 lb)
CardBoard Packaging dimensions	275 x 275 x 164 mm (10,83 x 10,83 x 6,46 in)

The 10W400 is a 400-W-program low frequency driver designed to satisfy the need for a 10" ferrite loudspeaker combining excellent linearity with good sensitivity and power handling characteristics. It is primarily recommended for compact bass reflex systems in enclosures as small as 25 lt.
The paper curvilinear cone is carried by a dampened linen, double half-roll front suspension to control vibration modes. The 8 mm Xmax ensures good travel control and linear excursion.
The 50 mm diameter state-of-the-art, copper wire voice coil employs same technology fitted to our top-of-the-range models, that is our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high force factor or BL.
Another feature of our products, retained in the 10W400 are the fine air channels between the chassis back plate and the top plate of the magnet, which draw heated air out from the voice coil gap and dissipate the energy through the chassis casting.
The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap using our in-house FEA CAD facility.

18 Sound 10MB600 148,00 EUR

SMALL SPECIFICATIONS

98 dB SPL 1W / 1m average sensitivity

75 mm (3 in) Interleaved Sandwich Voice coil (ISV)

450 W continuous pink noise power handling

Weather protected cone and plates for outdoor usage

Excellent transient response

Ideal for compact two way and multiway systems

Improved heat dissipation via unique basket design

GENERAL SPECIFICATIONS
Nominal Diameter	260 mm (10 in)
Rated Impedance	8 Ohm
Continuous Pink Noise (1)	450 W
Continuous Power (2)	350 W
Program Power (3)	700 W
Peak Power (4)	1500 W
Sensitivity (5)	98 dB
Frequency Range (6)	55 � 4500 Hz
Power Compression @-10dB (7)	(35 W) 0,4 dB
Power Compression @-3dB	(175 W) 1,6 dB
Power Compression @Full Power	(350 W) 2,2 dB
Max Recomm. Frequency	2500 Hz
Recomm. Enclosure Volume	10 � 40 lt. (0,9 � 1,41 cuft)
Minimum Impedance	6,4 Ohm at 25�C
Max Peak To Peak Excursion	24 mm (0,94 in)
Voice Coil Diameter	75 mm (2,95 in)
Voice Coil Winding Material	aluminum
Polarity	positive voltage on red terminal gives forward cone motion

THIELE SMALL PARAMETERS (8)
Fs	58 Hz
Re	5,7 Ohm
Sd	0,035 sq.mt. (54,25 sq.in.)
Qms	5,5
Qes	0,23
Qts	0,22
Vas	33,4 lt. (1,18 cuft)
Mms	38 gr. (0,08 lb)
BL	18,6 Tm
Linear Mathematical Xmax (9)	� 6,5 mm (� 0,26 in)
Le (1kHz)	1,6 mH
Ref. Efficiency 1W@1m (half space)	96,5 dB

MOUNTING INFORMATIONS
Overall diameter	260 mm (10,24 in)
N. of mounting holes	8
Mounting holes diameter	7,15 mm (0,28 in)
Bolt circle diameter	244,5 mm (9,63 in)
Front mount baffle cutout �	232 mm (9,13 in)
Rear mount baffle cutout �	232 mm (9,13 in)
Total depth	127 mm (5 in)
Flange and gasket thickness	14,5 mm (0,57 in)
Net weight	7,35 kg (16,23 lb)
Shipping weight	7,9 kg (17,44 lb)
CardBoard Packaging dimensions	275 x 275 x 164 mm (10,83 x 10,83 x 6,46 in)

The 10MB600 mid-bass transducer represents a development of the 10M600 midrange, combining excellent linearity with high efficiency and high power handling capabilities. The 10MB600 is primarily intended for use as a midbass driver in extremely compact 2-way reflex enclosures between 10 and 40 lt.
Its curvilinear paper cone is formed using a special high strength wood pulp, designed to achieve the best possible rigidity and stiffness. An exclusive treatment is also applied to the cone to increase its water repellent properties.
The 75 mm state-of-the-art voice coil is similar to those fitted to our top-of-the-range 18" and 15" models but it is wound with aluminum wire. The coil also employs our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil, resulting in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
The voice coil cooling is achieved using airways between the chassis back plate and the face plate of the magnet which allow heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. This technology is a result of 3D CAD resource application by our engineers.
The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap also using our in-house FEA CAD facility.
In addition, a special treatment is applied to the top and back plates making the transducer far more resistant to the corrosive effects of salts and oxidization. Hence, the equipment is able to perform outdoors in inclement weather conditions.

18 Sound 10M600 138,00 EUR

SMALL SPECIFICATIONS

102 dB SPL 1W / 1m average sensitivity

75 mm (3 in) Interleaved Sandwich Voice coil (ISV)

400 W continuous pink noise power handling

Excellent transient response

Ideal for direct radiating or horn loaded midrange systems

Improved heat dissipation via unique basket design

GENERAL SPECIFICATIONS
Nominal Diameter	260 mm (10 in)
Rated Impedance	8 Ohm
AES Power (1)	400 W
Musical Power (2)	800 W
Program Power (3)	500 W
Peak Power (4)	1200 W
Sensitivity (5)	102 dB
Frequency Range (6)	80 � 5200 Hz
Power Compression @-10dB (7)	(30 W) 0,5 dB
Power Compression @-3dB	(100 W) 1,6 dB
Power Compression @Full Power	(300 W) 2,3 dB
Max Recomm. Frequency	3000 Hz
Recomm. Enclosure Volume	5 � 30 lt. (0,18 � 1,09 cuft)
Minimum Impedance	6,4 Ohm at 25�C
Max Peak To Peak Excursion	16 mm (0,63 in)
Voice Coil Diameter	75 mm (2,95 in)
Voice Coil Winding Material	aluminum
Polarity	positive voltage on red terminal gives forward cone motion

THIELE SMALL PARAMETERS (8)
Fs	70 Hz
Re	5,2 Ohm
Sd	0,035 sq.mt. (54,25 sq.in.)
Qms	4,5
Qes	0,25
Qts	0,23
Vas	25,6 lt. (0,9 cuft)
Mms	32 gr. (0,07 lb)
BL	17,6 Tm
Linear Mathematical Xmax (9)	� 4 mm (�0,16 in)
Le (1kHz)	1,28 mH
Ref. Efficiency 1W@1m (half space)	97,7 dB

MOUNTING INFORMATIONS
Overall diameter	260 mm (10,24 in)
N. of mounting holes	8
Mounting holes diameter	7,15 mm (0,28 in)
Bolt circle diameter	244,5 mm (9,63 in)
Front mount baffle cutout �	232 mm (9,13 in)
Rear mount baffle cutout �	232 mm (9,13 in)
Total depth	126 mm (4,95 in)
Flange and gasket thickness	14,5 mm (0,57 in)
Net weight	7,35 kg (16,23 lb)
Shipping weight	7,8 kg (17,22 lb)
CardBoard Packaging dimensions	275 x 275 x 164 mm (10,83 x 10,83 x 6,46 in)

The 10M600 is our flagship 10" ferrite midrange driver which offers high power handling capability with exceptional sensitivity over the middle frequency band. It is suitable for either direct radiating or horn loaded applications as part of a 3 or 4-way auditorium, touring, or outdoor festival sound system. It is the result of an intensive development program which aimed to produce the best 10" ferrite midrange driver available.
The smooth curvilinear paper cone has a special high strength wood pulp composition and has been designed to achieve the best possible linearity within the middle frequency range and to control bell-mode resonances around the cone circumference. The cone is carried by a double half-roll suspension composed of a material which is more resistant to aging and fatigue than traditional materials, providing the correct damping and excursion control.
The 75 mm state-of-the-art voice coil assembly incorporates a fine edge-wound aluminum wire together with a strong fiberglas former to get the necessary force factor, mass lightness and high power handling.
The voice coil is cooled using airways between the chassis back plate and the magnet face plate, which allow heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. This technology is another product of 3D CAD resource application by our engineers.
The magnetic structure has also been optimized using our in-house FEA CAD resource which has maximized the flux density in the voice coil gap.
A special treatment is applied to both the top and back plates making them more resistant to the corrosive effects of salts and oxidation. This treatment is more effective than any other treatment in use today.

B&C 10NDL64 Chassis 129,00 EUR

500 W continuous program power capacity

64 mm (2.5 in) aluminium voice coil

50 � 3000 Hz response

97 dB sensitivity

Neodymium magnet allows a very light yet powerful motor assembly

Ventilated voice coil gap for reduced power compression

Specifications

Nominal Diameter 250 mm (10 in)

Nominal Impedance 8 ohm

Minimum Impedance 7 ohm

Nominal Power Handling 250 W

Continuous Power Handling 500 W

Sensitivity (1W/1m) 97 dB

Frequency Range 50 - 3000 Hz

Voice Coil Diameter 64 mm (2.5 in)

Winding Material Aluminium

Former Material Glass Fibre

Winding Depth 14 mm (0.55 in)

Magnetic Gap Depth 8 mm (0.31 in)

Flux Density 1.25 T

Parameters

Fs 56 Hz

Re 5.7 ohm

Qes 0.29

Qms 3.4

Qts 0.26

Vas 31 dm3 (1.10 ft3)

Sd 320 cm2 (50.00 in2)

η0 1.8 %

Xmax 6 mm

Xvar 7 mm

Mms 37 g

Bl 16.2 Txm

Le 0.9 mH

Mounting and Shipping info

Overall Diameter 261 mm (10.3 in)

Bolt Circle Diameter 245 mm (9.6 in)

Baffle Cutout Diameter 230 mm (8.8 in)

Depth 113 mm (4.4 in)

Flange and Gasket Thickness 13 mm (0.5 in)

Net Weight 2.9 kg (6.4 lb)

Shipping Weight 3.5 kg (7.7 lb)

Shipping Box 330x330x160 mm (13x13x6.3 in)

Design

Surround Shape Double Roll

Cone Shape Exponential

Magnet Type Neodymium Inside Slug

Spider Single

Pole Design Straight Pole

Waterproof TWP

Ventilation V.C. Gap Yes

B&C 10NW64 Chassis 129,00 EUR

600 W continuous program power capacity

64 mm (2.5 in) copper voice coil

50 � 2500 Hz response

96 dB sensitivity

Neodymium magnet allows a very light yet powerful motor assembly

Shorting copper cap for extended HF response

Ventilated voice coil gap for reduced power

Specifications

Nominal Diameter 250 mm (10 in)

Nominal Impedance 8 ohm

Minimum Impedance 6.5 ohm

Nominal Power Handling 300 W

Continuous Power Handling 600 W

Sensitivity (1W/1m) 96 dB

Frequency Range 50 - 2500 Hz

Voice Coil Diameter 64 mm (2.5 in)

Winding Material Copper

Former Material Glass Fibre

Winding Depth 16 mm (0.62 in)

Magnetic Gap Depth 8 mm (0.31 in)

Flux Density 1.25 T

Parameters

Fs 50 Hz

Re 5.2 ohm

Qes 0.27

Qms 4.5

Qts 0.26

Vas 27.5 dm3 (0.95 ft3)

Sd 320 cm2 (50.00 in2)

η0 1.3 %

Xmax 8 mm

Xvar 10 mm

Mms 47 g

Bl 17.5 Txm

Le 0.47 mH

Mounting and Shipping info

Overall Diameter 261 mm (10.3 in)

Bolt Circle Diameter 245 mm (9.6 in)

Baffle Cutout Diameter 230 mm (8.8 in)

Depth 113 mm (4.4 in)

Flange and Gasket Thickness 13 mm (0.5 in)

Net Weight 2.9 kg (6.4 lb)

Shipping Weight 3.5 kg (7.7 lb)

Shipping Box 330x330x160 mm (13x13x6.3 in)

Design

Surround Shape Double Roll

Cone Shape Exponential

Magnet Type Neodymium Inside Slug

Spider Single

Pole Design Straight Pole

Waterproof TWP

Ventilation V.C. Gap Yes

Shorting Copper Cap Yes

B&C 10HPL64 Chassis 135,00 EUR

400 W continuous program power capacity

64 mm (2.5 in) aluminium voice coil

60 � 4000 Hz response

98.5 dB sensitivity

Neodymium magnet allows a very light yet powerful motor assembly

Specifications

Nominal Diameter 250 mm (10 in)

Nominal Impedance 8 ohm

Minimum Impedance 6.2 ohm

Nominal Power Handling 200 W

Continuous Power Handling 400 W

Sensitivity (1W/1m) 99 dB

Frequency Range 60 - 4000 Hz

Voice Coil Diameter 64 mm (2.5 in)

Winding Material Aluminium

Former Material Glass Fibre

Winding Depth 12 mm (0.47 in)

Magnetic Gap Depth 8 mm (0.31 in)

Flux Density 1.25 T

Parameters

Fs 61 Hz

Re 5.4 ohm

Qes 0.33

Qms 4.5

Qts 0.31

Vas 32 dm3 (1.10 ft3)

Sd 320 cm2 (50.00 in2)

η0 2.5 %

Xmax 4 mm

Xvar 5.5 mm

Mms 29 g

Bl 15 Txm

Le 0.5 mH

Mounting and Shipping info

Overall Diameter 261 mm (10.3 in)

Bolt Circle Diameter 245 mm (9.6 in)

Baffle Cutout Diameter 230 mm (8.8 in)

Depth 122 mm (4.8 in)

Flange and Gasket Thickness 12.5 mm (0.5 in)

Net Weight 2 kg (4.4 lb)

Shipping Weight 2.6 kg (5.7 lb)

Shipping Box 270x270x150 mm (11.2x11.2x5.9 in)

Design

Surround Shape Double Roll

Cone Shape Exponential

Magnet Type Neodymium Inside Slug

Spider Single

Pole Design Straight Pole

B&C 10MD26 Chassis 159,00 EUR

700 W continuous program power capacity

76 mm (3 in) aluminium voice coil

80 � 4000 Hz response

100 dB sensitivity

Specifications

Nominal Diameter 250 mm (10 in)

Nominal Impedance 8 ohm

Minimum Impedance 7.2 ohm

Nominal Power Handling 350 W

Continuous Power Handling 700 W

Sensitivity (1W/1m) 100 dB

Frequency Range 80 - 4000 Hz

Voice Coil Diameter 76 mm (3 in)

Winding Material Aluminium

Former Material Glass Fibre

Winding Depth 11 mm (0.43 in)

Magnetic Gap Depth 8 mm (0.31 in)

Flux Density 1.45 T

Parameters

Fs 76 Hz

Re 5.8 ohm

Qes 0.22

Qms 4.8

Qts 0.21

Vas 20 dm3 (0.71 ft3)

Sd 320 cm2 (49.10 in2)

η0 3.9 %

Xmax 1.5 mm

Xvar 4.5 mm

Mms 31 g

Bl 19.6 Txm

Le 1.2 mH

Mounting and Shipping info

Overall Diameter 262 mm (10.3 in)

Bolt Circle Diameter 245 mm (9.6 in)

Baffle Cutout Diameter 230 mm (8.8 in)

Depth 124 mm (4.9 in)

Flange and Gasket Thickness 14 mm (0.55 in)

Net Weight 7.3 kg (16.1 lb)

Shipping Weight 7.9 kg (7.4 lb)

Shipping Box 320x320x160 mm (12x12x6.3 in)

Design

Surround Shape Double Roll

Cone Shape Exponential

Magnet Type Ceramic Ring

Spider Single

Pole Design T-Pole

B&C 10PS26 Chassis 145,00 EUR

700 W continuous program power capacity

76 mm (3 in) aluminium voice coil

55 � 4000 Hz response

96 dB sensitivity

Shorting copper cap for extended HF response

Specifications

Nominal Diameter 250 mm (10 in)

Nominal Impedance 8 ohm

Minimum Impedance 7.1 ohm

Nominal Power Handling 350 W

Continuous Power Handling 700 W

Sensitivity (1W/1m) 96 dB

Frequency Range 55 - 4000 Hz

Voice Coil Diameter 76 mm (3 in)

Winding Material Aluminium

Former Material Glass Fibre

Winding Depth 18 mm (0.71 in)

Magnetic Gap Depth 10 mm (0.4 in)

Flux Density 0.9 T

Parameters

Fs 54 Hz

Re 5.8 ohm

Qes 0.33

Qms 2.9

Qts 0.29

Vas 38 dm3 (1.30 ft3)

Sd 320 cm2 (49.10 in2)

η0 1.8 %

Xmax 5.5 mm

Xvar 5 mm

Mms 33 g

Bl 14.1 Txm

Le 1.2 mH

Mounting and Shipping info

Overall Diameter 262 mm (10.3 in)

Bolt Circle Diameter 245 mm (9.6 in)

Baffle Cutout Diameter 230 mm (8.8 in)

Depth 123 mm (4.8 in)

Flange and Gasket Thickness 14 mm (0.55 in)

Net Weight 6 kg (13.2 lb)

Shipping Weight 6.7 kg (14.7 lb)

Shipping Box 320x320x160 mm (12x12x6.3 in)

Design

Surround Shape Double Roll

Cone Shape Exponential

Magnet Type Ceramic Ring

Spider Single

Pole Design T-Pole

Shorting Copper Cap Yes

Kappa Pro -10 10" 500W 8 Ohm Gu�korb 119,00 EUR

KAPPA PRO-10A Professional Series

(Vd) Recommended for professional audio in a sealed mid-range, vented mid-bass, and bass enclosure.
Also suitable for bass guitar.

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms Power Rating** Watts 500W / Music Program 1000W
Resonance 46Hz
Usable Frequency Range*** 102Hz-2kHz
Sensitivity 97
Magnet Weight 80 oz.
Gap Height 0.375", 9.53mm
Voice Coil Diameter 3", 76.2mm

THIELE & Small Parameters

Resonant Frequency (fs) 46Hz
DC Resistance (Re) 6.50
Coil Inductance (Le) 1.15mH
Mechanical Q (Qms) 10.10
Electromagnetic Q (Qes) 0.20
Total Q (Qts) 0.20 Compliance Equivalent Volume (Vas) 52.2 liters / 1.8 cu. ft.
Peak Diaphragm Displacement Volume 110cc
Mechanical Compliance of Suspension (Cms) 0.31mm/N
BL Product (BL) 18.8 T-M
Diaphragm Mass inc. Airload (Mms) 38 grams
Efficiency Bandwidth Product (EBP) 230
Maximum Linear Excursion (Xmax) 3.2mm
Surface Area of Cone (Sd) 344.9 cm2
Maximum Mechanical Limit (Xlim) 10.9mm

MOUNTING Information

Recommended Enclosure Volume
Sealed 7-9.9 liters/0.25-0.35 cu. ft.
Vented 12-28 liters/0.43-1 cu.ft.
Overall Diameter 10.25", 260.4mm
Baffle Hole Diameter 9.13", 231.8mm
Front Sealing Gasket fitted as Standard
Rear Sealing Gasket fitted as Standard
Mounting Holes Diameter 0.28", 7.1mm
Mounting Holes B.C.D. 9.63", 244.5mm
Depth 4.33", 110mm
Net Weight 15.3 lbs., 6.9 kg
Shipping Weight 16.4 lbs., 7.4kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Ferrite magnet
Vented core
Die-cast aluminum basket
Paper Cone
Cloth cone edge
Solid composition paper dust cap

Eminence Basslite CA2010 10" 150W 8 Ohm 105,00 EUR

Eminence Basslite CA2010 10" 150W 8 Ohm

Recommended for bass guitar. Excellent in either sealed or vented enclosures. Nice, tight, top end.

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms
Power Rating** Watts 150W Music Program 300W
Resonance 51Hz
Usable Frequency Range*** 48Hz-7kHz
Sensitivity 93.5
Magnet Weight 4 oz.
Gap Height 0.28", 7.2mm
Voice Coil Diameter 2", 50.8mm

THIELE & Small Parameters

Resonant Frequency (fs) 51Hz
DC Resistance (Re) 5.46
Coil Inductance (Le) 0.55mH
Mechanical Q (Qms) 17.5
Electromagnetic Q (Qes) 0.52
Total Q (Qts) 0.51
Compliance Equivalent Volume (Vas) 49 liters / 1.7 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 126cc
Mechanical Compliance of Suspension (Cms) 0.27mm/N
BL Product (BL) 11.2 T-M
Diaphragm Mass inc. Airload (Mms) 37 grams
Efficiency Bandwidth Product (EBP) 98
Maximum Linear Excursion (Xmax) 3.5mm
Surface Area of Cone (Sd) 360.7 cm²
Maximum Mechanical Limit (Xlim) 7.0mm

MOUNTING Information

Recommended Enclosure Volume
Sealed 17-23 liters/ 0.6-0.8 cu.ft.
Vented 23-54 liters/ 0.8-1.9 cu.ft.
Overall Diameter 10.25", 260.4mm
Baffle Hole Diameter 9.13", 231.9mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket fitted as standard
Mounting Holes Diameter 0.28", 7.0mm
Mounting Holes B.C.D. 9.73", 247.1mm
Depth 4.75", 121mm
Net Weight 3.6 lbs.,1.6 kg
Shipping Weight 4.7 lbs., 2.1 kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Neodymium magnet
Non-vented core
Die-cast aluminum basket
Aluminum Alloy Cone
Cloth cone edge
Solid composition felt dust cap

Eminence Basslite CH2010 10" 150W 8 Ohm 99,00 EUR

Eminence Basslite CH2010 10" 150W 8 Ohm

Recommended for bass guitar. Ideal in vented 1X, 2X, and 4 X10 enclosures.

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms
Power Rating** Watts 150W Music Program 300W
Resonance 58Hz
Usable Frequency Range*** 54Hz-3kHz
Sensitivity 96.7
Magnet Weight 4 oz.
Gap Height 0.28", 7.2mm
Voice Coil Diameter 2", 50.8mm

THIELE & Small Parameters

Resonant Frequency (fs) 58Hz
DC Resistance (Re) 5.37
Coil Inductance (Le) 0.52mH
Mechanical Q (Qms) 6.5
Electromagnetic Q (Qes) 0.47
Total Q (Qts) 0.44
Compliance Equivalent Volume (Vas) 43 liters / 1.5 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 120cc
Mechanical Compliance of Suspension (Cms) 0.26mm/N
BL Product (BL) 11.1 T-M
Diaphragm Mass inc. Airload (Mms) 30 grams
Efficiency Bandwidth Product (EBP) 123
Maximum Linear Excursion (Xmax) 3.5mm
Surface Area of Cone (Sd) 344.9 cm²
Maximum Mechanical Limit (Xlim) 7.5mm

MOUNTING Information

Recommended Enclosure Volume
Sealed N/A
Vented 17-51 liters/ 0.6-1.8 cu.ft.
Overall Diameter 10.25", 260.4mm
Baffle Hole Diameter 9.13", 231.9mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket fitted as standard
Mounting Holes Diameter 0.28", 7.0mm
Mounting Holes B.C.D. 9.73", 247.1mm
Depth 4.75", 121mm
Net Weight 3.6 lbs.,1.6 kg
Shipping Weight 4.7 lbs., 2.1 kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Neodymium magnet
Non-vented core
Die-cast aluminum basket
Hemp Cone �
Cloth cone edge
Zurette dust cap

10'' B Guitar Legend 8 Ohm Blechkorb 95,00 EUR

LEGEND B102

Recommended for professional bass guitar applications in a vented enclosure. Also suitable as a professional audio mid-
range.

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms
Power Rating** Watts 200W Music Program 400W
Resonance 48Hz
Usable Frequency Range*** 44Hz-4kHz
Sensitivity 93
Magnet Weight 45 oz.
Gap Height 0.312", 7.92mm
Voice Coil Diameter 2", 50.8mm

THIELE & Small Parameters

Resonant Frequency (fs) 48Hz
DC Resistance (Re) 6.89
Coil Inductance (Le) 0.67mH
Mechanical Q (Qms) 5.31
Electromagnetic Q (Qes) 0.42
Total Q (Qts) 0.39
Compliance Equivalent Volume (Vas) 65 liters / 2.3 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 104cc
Mechanical Compliance of Suspension (Cms) 0.40mm/N
BL Product (BL) 11.8 T-M
Diaphragm Mass inc. Airload (Mms) 28 grams
Efficiency Bandwidth Product (EBP) 113
Maximum Linear Excursion (Xmax) 3.0mm
Surface Area of Cone (Sd) 344.9 cm²
Maximum Mechanical Limit (Xlim) 8.0mm

MOUNTING Information

Recommended Enclosure Volume
Sealed N/A
Vented 18-85 liters/0.63-3 cu.ft.
Overall Diameter 10.25", 260.4mm
Baffle Hole Diameter 9.13", 231.8mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket N/A
Mounting Holes Diameter 0.28", 7.1mm
Mounting Holes B.C.D. 9.63", 244.5mm
Depth 4.33", 110mm
Net Weight 9.7 lbs., 4.4 kg
Shipping Weight 10.9 lbs., 4.9 kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Ferrite magnet
Vented and extended core
Cloth cone edge
Solid composition paper dust cap

Er ist der beste, universellste und breitbandigste Bassgitarrenlautsprecher. Er bringt jede Menge Druck und ist gleicherma�en f�r alle Stilrichtungen wie Pop, Slap Bass, Jazz und Rock / 'n Roll geeignet. Durch Einsatz eines effektiven Hochtonkegels er�brigt sich ein zus�tzlicher Hochtonlautsprecher. Dieser Lautsprecher ist ein idealer Austauschtyp zur Verbesserung bestehender Bass-Anlagen.

Eminence Deltalite II 2510 10'' 250W 8 Ohm 89,00 EUR

DELTALITE� II 2510 Neodymium

Recommended for professional audio as a mid/hi or full-range and monitor; also for bass guitar. Works well in
sealed or vented enclosures.

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms
Power Rating** Watts 250W / Music Program 500W
Resonance 53Hz
Usable Frequency Range*** 60Hz-4kHz
Sensitivity 97.3
Magnet Weight 7 oz
Gap Height 0.275", 7mm
Voice Coil Diameter 2.5", 63.5mm

THIELE & Small Parameters

Resonant Frequency (fs) 53Hz
DC Resistance (Re) 5.06
Coil Inductance (Le) 0.40mH
Mechanical Q (Qms) 5.76
Electromagnetic Q (Qes) 0.45
Total Q (Qts) 0.42
Compliance Equivalent Volume (Vas) 52.5 liters / 1.9 cu. ft.
Peak Diaphragm Displacement Volume 147cc
Mechanical Compliance of Suspension (Cms) 0.30mm/N
BL Product (BL) 10.6 T-M
Diaphragm Mass inc. Airload (Mms) 31 grams
Efficiency Bandwidth Product (EBP) 117
Maximum Linear Excursion (Xmax) 4.2mm
Surface Area of Cone (Sd) 350.1 cm2
Maximum Mechanical Limit (Xlim) 8.0mm

MOUNTING Information

Recommended Enclosure Volume
Sealed 12.7-17 liters/0.45-0.6 cu. ft.
Vented 17-39.6 liters/0.6-1.4 cu. ft.
Overall Diameter 10.25",260.4mm
Baffle Hole Diameter 9.15", 232.4mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket fitted as standard
Mounting Holes Diameter 0.28", 7mm
Mounting Holes B.C.D. 9.73", 247.1mm
Depth 4.9", 123.8mm
Net Weight 4.6 lbs., 2.1 kg
Shipping Weight 5.7 lbs. , 2.6kg

MATERIALS of Construction

Aluminum voice coil
Polyimide former
Neodymium magnet
Vented core
Die-cast aluminum basket/ heatsink
Paper Cone
Cloth cone edge
Solid composition paper dust cap

10'' 35W Guitar Legend 8 Ohm Blechkorb 79,00 EUR

LEGEND 1028K

Vintage alnico and seamed cone tonality for guitar. Ideal Vintage alnico Jensen replacement.
Coloration : A very bluesy speaker with lots of sparkle, definition, and percussive characteristics.
Genre : Blues, Country, Rock.

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms
Power Rating** Watts 35W / Music Program N/A
Resonance 95Hz
Usable Frequency Range*** 100Hz-5.5kHz
Sensitivity 97.4
Magnet Weight 6 oz.
Gap Height 0.25", 6.2mm
Voice Coil Diameter 1", 25.4mm

THIELE & Small Parameters

Resonant Frequency (fs) 95Hz
DC Resistance (Re) 5.8
Coil Inductance (Le) 0.51mH
Mechanical Q (Qms) 17.96
Electromagnetic Q (Qes) 1.61
Total Q (Qts) 1.47
Compliance Equivalent Volume (Vas) 31.5 liters / 1.1 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 72cc
Mechanical Compliance of Suspension (Cms) 0.19mm/N
BL Product (BL) 5.7 T-M
Diaphragm Mass inc. Airload (Mms) 15 grams
Efficiency Bandwidth Product (EBP) 59
Maximum Linear Excursion (Xmax) 2.1mm
Surface Area of Cone (Sd) 344.9 cm²
Maximum Mechanical Limit (Xlim)

MOUNTING Information

Recommended Enclosure Volume
Sealed Acceptable
Vented Acceptable
Overall Diameter 10.11", 256.8mm
Baffle Hole Diameter 9.05", 229.9mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket N/A
Mounting Holes Diameter 0.22", 5.6mm
Mounting Holes B.C.D. 9.6", 243.8mm
Depth 4.8", 122mm
Net Weight 2.9 lbs., 1.3 kg
Shipping Weight 4 lbs., 1.8 kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Alnico magnet
Non-vented core
Pressed steel basket
Paper Cone
Paper cone edge
Solid composition felt dust cap

Dieser Alnico Lautsprecher wurde von Eminence f�r einige der weltbesten Verst�rkerhersteller jahrelang produziert. Dieser Klassiker trug durch seinen warmen, bluesigen Ton dazu bei, dass Musiker zu Legenden wurden. Wir spezifizieren die Ausf�hrung die neue Kapton Version (schwarzer Korb) mit 35 W.

Eminence Basslite S2010 10" 150W 8 Ohm 79,00 EUR

Eminence Basslite S2010 10" 150W 8 Ohm

Recommended for bass guitar. Ideal in vented 1X, 2X, and 4 X10 enclosures.

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms
Power Rating** Watts 150W Music Program 300W
Resonance 46Hz
Usable Frequency Range*** 54Hz-4kHz
Sensitivity 96.2
Magnet Weight 4 oz.
Gap Height 0.28", 7.2mm
Voice Coil Diameter 2", 50.8mm

THIELE & Small Parameters

Resonant Frequency (fs) 46Hz
DC Resistance (Re) 5.02
Coil Inductance (Le) 0.47mH
Mechanical Q (Qms) 4.16
Electromagnetic Q (Qes) 0.34
Total Q (Qts) 0.31
Compliance Equivalent Volume (Vas) 63.4 liters / 2.2 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 140cc
Mechanical Compliance of Suspension (Cms) 0.36mm/N
BL Product (BL) 11.9 T-M
Diaphragm Mass inc. Airload (Mms) 33 grams
Efficiency Bandwidth Product (EBP) 135
Maximum Linear Excursion (Xmax) 4.0mm
Surface Area of Cone (Sd) 350.1 cm²
Maximum Mechanical Limit (Xlim) 8.0mm

MOUNTING Information

Recommended Enclosure Volume
Sealed N/A
Vented 20-51 liters/ 0.7-1.8 cu.ft.
Overall Diameter 10.08", 256mm
Baffle Hole Diameter 9.05", 229.9mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket as standard
Mounting Holes Diameter 0.25", 6.4mm
Mounting Holes B.C.D. 9.66", 245.4mm
Depth 4.25", 108mm
Net Weight 3.5 lbs., 1.6 kg
Shipping Weight 4.6 lbs., 2.1 kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Neodymium magnet
Non-vented core
Pressed steel basket
Paper Cone
Cloth cone edge
Solid composition felt dust cap

Eminence Ramrod 10'' 75W 8 Ohm 79,00 EUR

RAMROD�

ram'rod n. a meaty, 10" guitar speaker with British influence setting the standard for 10" speakers
Coloration : Very loud, gutsy, and meaty tone with singing highs and nice, clear overtones
Genre : British Rock and Blues, Country and Jazz

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms
Power Rating** Watts 75W / Music Program N/A
Resonance 101Hz
Usable Frequency Range*** 80Hz-5kHz
Sensitivity 100
Magnet Weight 30 oz.
Gap Height 0.312", 7.92mm
Voice Coil Diameter 1.5", 38.1mm

THIELE & Small Parameters

Resonant Frequency (fs) 101Hz
DC Resistance (Re) 7.3
Coil Inductance (Le) 0.39mH
Mechanical Q (Qms) 10.80
Electromagnetic Q (Qes) 0.68
Total Q (Qts) 0.64
Compliance Equivalent Volume (Vas) 24.6 liters / 0.9 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 18cc
Mechanical Compliance of Suspension (Cms) 0.13mm/N
BL Product (BL) 11.5 T-M
Diaphragm Mass inc. Airload (Mms) 19 grams
Efficiency Bandwidth Product (EBP) 149
Maximum Linear Excursion (Xmax) 0.5mm
Surface Area of Cone (Sd) 366.1 cm²
Maximum Mechanical Limit (Xlim) N/A

MOUNTING Information

Recommended Enclosure Volume
Sealed Acceptable
Vented Acceptable
Overall Diameter 10.11", 256.8mm
Baffle Hole Diameter 9.13", 231.8mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket fitted as standard
Mounting Holes Diameter 0.23", 5.7mm
Mounting Holes B.C.D. 9.6", 243.8mm
Depth 4.3", 109mm
Net Weight 5.4 lbs., 2.5 kg
Shipping Weight 8.3 lbs., 3.8 kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Ferrite magnet
Non-vented core
Pressed steel basket
Paper Cone **
Paper cone edge
Zurette dust cap

Eminence Ragin Cajun 10'' 75 W 8 Ohm 75,00 EUR

RAGIN CAJUN�

ragin n. a very hot 10" American guitar speaker with rockin blues tone
Coloration : Very loud, touch-sensitive and responsive with nice bell-sounding top end and a little bite
Genre : American Rock, Blues, and Country

SPECIFICATION

Nominal Basket Diameter 10", 254mm
Nominal Impedance* 8 ohms
Power Rating** Watts 75W / Music Program N/A
Resonance 84Hz
Usable Frequency Range*** 70Hz-5kHz
Sensitivity 100
Magnet Weight 30 oz.
Gap Height 0.312", 7.92mm
Voice Coil Diameter 1.5", 38.1mm

THIELE & Small Parameters

Resonant Frequency (fs) 84Hz
DC Resistance (Re) 7.3
Coil Inductance (Le) 0.39mH
Mechanical Q (Qms) 10.8
Electromagnetic Q (Qes) 0.68
Total Q (Qts) 0.64
Compliance Equivalent Volume (Vas) 34.1 liters / 1.2 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 18cc
Mechanical Compliance of Suspension (Cms) 0.18mm/N
BL Product (BL) 11.5 T-M
Diaphragm Mass inc. Airload (Mms) 20 grams
Efficiency (EBP) Bandwidth Product 156
Maximum Linear Excursion (Xmax) 0.5mm
Surface Area of Cone (Sd) 366.1 cm²
Maximum Mechanical Limit (Xlim) N/A

MOUNTING Information

Recommended Enclosure Volume
Sealed Acceptable
Vented Acceptable
Overall Diameter 10.11", 256.8mm
Baffle Hole Diameter 9.13", 231.8mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket fitted as standard
Mounting Holes Diameter 0.23", 5.7mm
Mounting Holes B.C.D. 9.6", 243.8mm
Depth 4.3", 109mm
Net Weight 6.4 lbs., 2.9 kg
Shipping Weight 8.2 lbs., 3.7 kg

MATERIALS of Construction

Copper voice coil
Polyimide former
Ferrite magnet
Non-vented core
Pressed steel basket
Paper Cone
Paper cone edge
Zurette dust cap