HN-Sound /PA-Chassis/Horn 1,4"Artikel

18 Sound XR1496 108,00 EUR

SMALL SPECIFICATIONS

1,4 inch entry

Die-cast aluminium construction for excellent heat transfer

Rotatable structure

Uniform on-axis and off-axis frequency response

90� x 60� horizontal and vertical constant coverage

Very low distortion at high sound pressure

Improved compression driver cooling

GENERAL SPECIFICATIONS
Throat Diameter	35,5 mm (1,4 in)
Horizontal Coverage (-6dB)	90� (15 � -10) average range (1,25kHz - 12,5kHz)
Vertical Coverage (-6 dB)	60� (18 � -12) average range (1,25kHz - 12,5kHz)
Directivity Index	9dB (1,8 � -1,2) average range (1,25kHz - 12,5kHz)
Usable Frequency Range	Above 500 Hz
Recomm. Cross.Frequency	800 Hz or more
Sensitivity (on axis) (1)	110 dB
Frequency Range	800 Hz - 18kHz

MOUNTING INFORMATIONS
Mouth Height	270 mm (10,6 in)
Mouth Width	270 mm (10,6in)
Depth	180 mm (7,1 in)
Mouth Mounting Dimensions	8 � 6 holes
Net weight	1,9 Kg (4 lb)

The XR1496 has been designed in order to obtain a smooth frequency response maintaining constant coverage and directivity pattern, and avoiding the midrange narrowing effect as well as high frequency beaming problems.
With a throat entry of 1,4 inch, the XR1496 has been developed to reach the optimum performance when it will coupled with 1,4 inch exit Eighteen Sound high frequency compression drivers.
The die cast aluminium construction brings the following advantages:
- thermal: aluminum horns are capable to reduce up to 30�C the steady state compression driver working temperature at full power, when compared to an equivalent size plastic horn. This reflects in a lower power compression ratio (down to 1dB) as well as higher driver power handling (30% higher);
- mechanical: aluminum horns do not require any mechanical support for the compression driver (like brackets), avoiding the issue of horn resonance with optimum waterfall and impulse system behaviour.
The XR1496 maintains nominal 90� Horizontal x 60� Vertical pattern control, providing consistent on-axis and off-axis frequency response from 1,2kHz to 16kHz in both horizontal and vertical planes. Horn directivity is constant down to 1,2kHz.

18 Sound XR1464 85,00 EUR

SMALL SPECIFICATIONS

1,4 inch entry

Die-cast aluminium construction for excellent heat transfer

Rotatable structure

Uniform on-axis and off-axis frequency response

60� x 40� horizontal and vertical constant coverage

Very low distortion at high sound pressure

Improved compression driver cooling

GENERAL SPECIFICATIONS
Throat Diameter	35,5 mm (1,4 in)
Horizontal Coverage (-6dB)	60� (10, -2) average range (1,25kHz - 12,5kHz)
Vertical Coverage (-6 dB)	40� (25, 0) average range (1,25kHz - 12,5kHz)
Directivity Index	11 dB (2 - 1) average range (1,25kHz - 12,5kHz)
Usable Frequency Range	Above 500 Hz
Recomm. Cross.Frequency	800 Hz or more
Sensitivity (on axis) (1)	110 dB
Frequency Range	800 Hz - 18KHz

MOUNTING INFORMATIONS
Mouth Height	270 mm (10,6 in)
Mouth Width	270 mm (10,6in)
Depth	180 mm (7,1 in)
Mouth Mounting Dimensions	8 � 6 holes
Net weight	1,9 Kg (4 lb)

The XR1464 is a part the new Eighteen Sound XR horn series. With a throat entry of 1,4 inch, the XR1464 has been developed to reach the optimum performance when it will coupled with 1,4 inch exit Eighteen Sound high frequency compression drivers.
All XR horn series have been designed in order to reach smooth driver frequency response, to maintain constant coverage and directivity and eliminating the midrange narrowing and high frequency beaming problems common of many similar horns on the market.
XR series are made in die cast aluminium material in order to obtain the best performance under many point of view:
- thermal: aluminum horns are capable to reduce up to 30�C the steady state compression driver working temperature at full power, when compared to equivalent size plastic horn. This gives lower power compression ratio (down to 1dB) and higher driver power handling (30% higher);
- mechanical: aluminum horns do not require any support for the compression driver (likes brackets), and at the same time eliminate the problem of horn resonance with optimum waterfall and impulse system behaviour.
The XR1464 maintains nominal 60� Horizontal x 40� Vertical pattern control. It provides consistent on-axis and off-axis frequency response from 1,2kHz to 16kHz in both horizontal and vertical planes. Horn directivity is constant down to 1,2kHz.

18 Sound XT1464 42,00 EUR

SMALL SPECIFICATIONS

1.4 inch Entry

Unique Eighteen Sound elliptical shape

Die-cast polyurethane foam construction

Uniform on-axis and off-axis frequency response

60� x 50� horizontal and vertical constant coverage

Very low distortion at high sound pressure levels

GENERAL SPECIFICATIONS
Throat Diameter	35,5 mm (1,4 in)
Horizontal Coverage (-6dB)	60� (8, -12) average range (1,25KHz - 12,5KHz)
Vertical Coverage (-6 dB)	50� (15, -10) average range (1,25KHz - 12,5KHz)
Directivity Index	18 dB (1,8 - 2,6) average range (1,25KHz - 12,5KHz)
Usable Frequency Range	Above 500 Hz
Recomm. Cross.Frequency	800 Hz or more
Sensitivity (on axis) (1)	110 dB
Frequency Range	800 Hz - 18KHz

MOUNTING INFORMATIONS
Mouth Height	304 mm (12 in)
Mouth Width	380 mm (15in)
Depth	257 mm (10,1 in)
Mouth Mounting Dimensions	8 �6 holes
Net weight	1,3 Kg (2,87 lb)

Featuring the unique Eighteen Sound elliptical shape, the XT1464 Constant Coverage High Frequency Horn has been developed for use in sound systems, where the highest quality is required. With a 1.4" throat entry, the XT1464 has been designed to exactly match the new generation of neodymium high frequency compression drivers, namely the ND1480, ND1460 and NSD1480N.
The XT1464 maintains nominal 60� Horizontal x 50� Vertical pattern control. It provides consistent on-axis and off-axis frequency response from 800Hz to 15kHz in the horizontal plane and from 1,5kHz to 15kHz in the vertical plane. Horn directivity is constant from 1,5kHz. Thanks to its compact vertical mouth dimensions, the XT1464 can easily be staked vertically when lower frequency control is required.
The horn structure made from high-pressure die-cast polyurethane foam eliminates resonance and vibrations and assures maximum strength. The XT1464 provides low distortion and a spherical wave-front, avoiding reflections and other disadvantages usually associated with diffraction horns. The horn contours were developed using Computer Aided Finite Element Analysis, as well as extensive testing.

B&C ME90 Horn 73,90 EUR

1.4" throat entry

80� x 60� nominal coverage

Constant Directivity

Very good loading down to 900 Hz

Specifications

Throat Diameter 36 mm (1.4 in)

Nominal Coverage Horizontal 80°

Nominal Coverage Vertical 60°

Cutoff Frequency 0.9 kHz

Material Cast Aluminium

Dimensions 270x270x138 mm (10.6x10.6x5.4 in)

Mounting and Shipping info

Baffle Cutout Dimensions 255x255 mm (8.8x8.8 in)

Net Weight 1.4 kg (3.1 lb)

Shipping Weight 1.9 kg (4.2 lb)

Shipping Box 290x290x170 mm (11.4x11.4x6.7 in)