18 Sound 15CX1000 595,00 EUR

SMALL SPECIFICATIONS

98 dB SPL 1W / 1m average sensitivity

100mm (4") Interleaved Sandwich Voice LF coil (ISV)

1000 W continuous pink noise power handling

Copper shorting ring for constant power transfer

1,4" exit HF neodymium compression driver

75mm (3") HF edgewound voice coil with high temperature Ferrofluid

70 degrees nominal dispersion

Weather protected cone and plates for outdoor usage

Ideal for very compact enclosures and stage monitors

GENERAL SPECIFICATIONS
Nominal Diameter	380 mm (15 in)
Rated Impedance	8 Ohm
Continuous Pink Noise (1)	850 W
Continuous Power (2)	600 W
Program Power (3)	1200 W
Peak Power (4)	3000 W
Sensitivity (5)	98 dB
Frequency Range (6)	45 � 5100 Hz
Power Compression @-10dB (7)	0,9 dB
Power Compression @-3dB	2,1 dB
Power Compression @0dB	3,8 dB
Max Recomm. Frequency	1000 Hz
Recomm. Enclosure Volume	70 � 150 lt. (2,47 � 5,3 cuft)
Minimum Impedance	6 Ohm at 25�C
Max Peak To Peak Excursion	39 mm (1,53 in)
Voice Coil Diameter	100 mm (4 in)
Voice Coil Winding Material	aluminum

HF

The 15CX1000 is a 15" � 1.4" coaxial transducer designed for use in compact reflex enclosures and stage monitors as small as 50 lt with a nominal dispersion of 70 degrees.
The low profile, carbon fiber reinforced, smooth curvilinear LF cone provides smooth response within its intended frequency range and exceptional strength, with maximum reliability under high mechanical stress.
The state-of-the-art 100 mm (4 in) LF voice coil employs our Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces. This results in a balanced coil with a uniform distribution of mass and motive energy and an extremely linear motor assembly.
A copper-shorting ring on the LF section plates has been adopted to reduce inductance and improve transient response. Hence, the intermodulation distortion figure has been heavily improved.
The neodymium 1.4" exit compression driver adopted is our ND1480 model, which has been given further thermal power handling capacity by adding specific Ferrofluid in the gap. This has improved the thermal exchange properties even more. Moreover, a specific dedicated application design has been chosen by Eighteen Sound engineers in order to maximize the cone�s profile coupling.
The HF driver diaphragm assembly, using a high strength, high temperature treated Nomex voice coil former joined directly to the titanium dome on its upper bend edge, assures extended frequency energy transfer. This improves linearity and shows unparallelled reliability when compared with a usual straight former joint.
The HF motor structure utilizes a precisely machined coherent phase plug with 3 circumferential slots and a machined copper ring on the pole piece. This last feature reduces the inductance figure of frequencies above 10 kHz, improving phase and impedance linearisation.
Due to the widespread use of high power audio systems at outdoor events, the ability to perform in adverse weather conditions is key feature of the 15CX1000. This has been achieved using exclusive cone and magnet plate treatment processes which increase resistance against corrosion and make the cone water repellent.

B&C 15CXN76 Chassis 539,00 EUR

800 W continuous program power capacity

80� nominal coverage

40 � 18000 Hz response

99 dB sensitivity

Single Neodymium magnet assembly

Specifications

Nominal Diameter 380 mm (15 in)

Nominal Impedance 8 ohm

Minimum Impedance 6 Ohm (LF) 8 Ohm (HF)

Frequency Range 40 - 18000 Hz

Dispersion Angle 80°

Diaphragm Material Polyester/Titanium

Recom Crossover 1.2 kHz

Magnet Material Neodymium Ring

LF Unit

Sensitivity (1W/1m) 99 dB

Nominal Power Handling 400 W

Continuous Power Handling 800 W

Voice Coil Diameter 76 mm (3 in)

Winding Material Copper

HF Unit

Sensitivity (1W/1m) 105 dB

Nominal Power Handling 80 W

Continuous Power Handling 160 W

Voice Coil Diameter 75 mm (3 in)

Winding Material Aluminium

Parameters

Fs 38 Hz

Re 5.1 ohm

Qes 0.3

Qms 5.8

Qts 0.28

Vas 246 dm3 (8.60 ft3)

Sd 855 cm2 (132.50 in2)

η0 3.7 %

Xmax 4.5 mm

Xvar 6 mm

Mms 82 g

Bl 17.8 Txm

Le 0.9 mH

Mounting and Shipping info

Overall Diameter 393 mm (15.5 in)

Bolt Circle Diameter 374 mm (14.7 in)

Baffle Cutout Diameter 353 mm (13.9 in)

Depth 198 mm (7.8 in)

Flange and Gasket Thickness 16 mm (0.62 in)

Net Weight 5.6 kg (12.3 lb)

Shipping Weight 7 kg (15.4 lb)

Shipping Box 450x450x290 mm (17.7x17.7x11.4 in)

HN-Sound /PA-Chassis/Coax 15"Artikel

18 Sound 15CX1000 595,00 EUR

B&C 15CXN76 Chassis 539,00 EUR