HN-Sound /PA-Chassis/1.4 Zoll TreiberArtikel

18 Sound ND1460 315,00 EUR

SMALL SPECIFICATIONS

109 dB 1W / 1m average sensitivity

1,4 inch exit throat

3 inch voice coil diameter

200 W continuous program power handling

Pure Titanium diaphragm assembly

Excellent thermal exchange

Neodymium magnetic structure

GENERAL SPECIFICATIONS
Throat Diameter	35,5 mm (1,4 in)
Rated Impedance	8 ohm
DC Resistance	6,2 ohm
Minimum Impedance	8 ohm at 3500 Hz
Le (at 1kHz)	124 �H
Power handling
Continuous Pink Noise (1)	100 W above 1,2 kHz
Continuous Program (2)	200 W above 1,2 kHz
Sensitivity(1W@1m) (3)	109 dB
Frequency Range	500 Hz � 20 kHz
Recomm. Xover Frequency	above 800 Hz (12 dB/octave)
Diaphragm Material	Titanium
Voice Coil Diameter	74,4 mm (2,93 in)
Voice Coil Winding Material	Edge-wound aluminum
Magnet Material	Neodymium
Flux Density	1,9 T
BL Factor	13,5 N/A
Polarity	Positive voltage on red terminal gives positive pressure in the throat

MOUNTING INFORMATIONS
Overall diameter	132,5 mm (5,22 in)
Mounting holes diameter	4 M6 holes 90� at �102 mm (4 in)
Bolt circle diameter	102mm (4 in)
Total depth	62 mm (2,5 in)
Net weight	3,2 Kg (7,1 lb)
Shipping weight	3,4 Kg (7,5 lb)
CardBoard Packaging dimensions	132x132x68 mm (5,2x5,2x2,7 in)

The ND1460 high frequency compression driver has been designed for use in high quality sound systems. With a 1.4 inch exit throat, it has been developed to match the XT1464 constant directivity horn.
Its titanium diaphragm is produced in house and has been developed to assure unmatched transient response. The diaphragm assembly is made by joining the former directly to the titanium dome using its upper bend edge. In comparison with a usual straight former joint, the driver design assures extended frequency energy transfer giving improved response linearity and unparallel reliability. This feature facilitates proper motion control of the dome in real working conditions. A proprietary treated Nomex former is used as Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200�C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in high moisture content environments.
The big innovation in the ND1460 is its new innovative magnetic architecture. By carefully using elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 19KGauss in the gap in compact and lightweight structures. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures.
The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value.
Due to the increase in use of high power audio systems at outdoor events or in marine environments, the ability of equipment to perform properly under inclement weather conditions is a key feature of the Eighteen Sound philosophy. Hence, a special treatment is applied to the magnet and the top and back plates of the magnetic structure which increases the driver�s resistance to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment in use today.

18 Sound ND1480 379,00 EUR

SMALL SPECIFICATIONS

110 dB 1W / 1m average sensitivity

1,4 inch exit throat

3 inch voice coil diameter

200W continuous program power handling

Pure Titanium diaphragm assembly

Excellent thermal exchange

Neodymium ring magnetic structure

GENERAL SPECIFICATIONS
Throat Diameter	35,5 mm (1,4 in)
Rated Impedance	8 ohm
DC Resistance	6,2 ohm
Minimum Impedance	8 ohm at 3500 Hz
Le (at 1kHz)	124 �H
Power handling
Continuous Pink Noise (1)	100 W above 1,2 kHz
Continuous Program (2)	200 W above 1,2 kHz
Sensitivity(1W@1m) (3)	110 dB
Frequency Range	500 Hz � 20 kHz
Recomm. Xover Frequency	above 800 Hz (12 dB/octave)
Diaphragm Material	Titanium
Voice Coil Diameter	74,4 mm (2,93 in)
Voice Coil Winding Material	Edge-wound aluminum
Magnet Material	Neodymium
Flux Density	2,2 T
BL Factor	15,5 N/A
Polarity	Positive voltage on red terminal gives positive pressure in the throat

MOUNTING INFORMATIONS
Overall diameter	131 mm (5,1 in)
Mounting holes diameter	4 M6 holes 90� at �102 mm (4 in)
Bolt circle diameter	102mm (4 in)
Total depth	62 mm (2,5 in)
Net weight	3,1 Kg (6,98 lb)
Shipping weight	3,3 Kg (7,25 lb)
CardBoard Packaging dimensions	132x132x68 mm (5,2x5,2x2,7 in)

The ND1480 high frequency compression driver has been designed for high level sound systems application. With a 1.4 inch exit throat, the ND1480 has been developed to match the XT1464 Constant Directivity Horn.
The titanium diaphragm is produced in house and has been developed to assure unmatched transient response. The diaphragm assembly is made by joining the former directly to the titanium dome on its upper bend edge. In comparison with a usual straight former joint, the driver�s design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature facilitates proper motion control of the dome in real working conditions. A proprietary treated Nomex former is used as Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200�C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in higher moisture content environments.
The ND1480 powerful neodymium magnet assembly has been designed to obtain 22KGauss in the gap for major benefits in transient response. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effect and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures.
The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value.
Due to the increase in use of high power audio systems at outdoor events or in marine environments, the ability of equipment to perform properly under inclement weather conditions is a key feature of the Eighteen Sound philosophy. Hence, a special treatment is applied to the magnet and the top and back plates of the magnetic structure in order to make the driver more resistant to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment in use today.

18 Sound NSD1480N 480,00 EUR

SMALL SPECIFICATIONS

111 dB 1W / 1m average sensitivity

1,4 inch exit throat

3 inch voice coil diameter

200 W continuous program power handling

Titanium Nitride Coating Dome

True Piston Motion (TPM) Technology

Powerfully Neodymium magnetic structure

Excellent thermal exchange

GENERAL SPECIFICATIONS
Throat Diameter	35,5 mm (1,4 in)
Rated Impedance	8 ohm
DC Resistance	6,2 ohm
Minimum Impedance	8 ohm at 3500 Hz
Le (at 1kHz)	124 �H
Power handling	(800 � 20000 Hz)
Continuous Pink Noise (1)	100 W above 1,2 kHz
Continuous Program (2)	200 W above 1,2 kHz
Sensitivity(1W@1m) (3)	111 dB
Frequency Range	500 Hz � 20 kHz
Recomm. Xover Frequency	above 800 Hz (12 dB/octave)
Diaphragm Material	Treated Titanium
Voice Coil Diameter	74,4 mm (2,93 in)
Voice Coil Winding Material	Edge-wound aluminum
Magnet Material	Neodymium
Flux Density	2,2 T
BL Factor	15,5 N/A
Polarity	Positive voltage on red terminal gives positive pressure in the throat

MOUNTING INFORMATIONS
Overall diameter	131 mm (5,1 in)
Mounting holes diameter	4 M6 holes 90� at �102 mm (4 in)
Bolt circle diameter	102mm (4 in)
Total depth	62 mm (2,5 in)
Net weight	3,1 Kg (6,98 lb)
Shipping weight	3,3 Kg (7,25 lb)
CardBoard Packaging dimensions	132x132x68 mm (5,2x5,2x2,7 in)

The NSD1480N has been designed for top quality sound systems application. With a 1.4-inch throat diameter, it has been developed to match the XT1464 Constant Directivity Horn.
A further innovation in the NSD1480N, when compared to excellent performances of the ND1480, is a new titanium material treatment that was found after extensive research by Eighteen Sound.
The special titanium nitride coated dome dramatically improves stiffness with obvious benefits in transient and intermodulation distortion response. With its very high value of elasticity modulus, (six times higher than titanium and two times higher than beryllium), this nitride thin film is capable of doubling the titanium stiffness.
The piston frequency range motion extends frequency by 25%, showing a predictable, ideal frequency response decay and avoiding top-end spurious resonances. The nitride-free ellipsoidal suspension shape has been designed to maintain constant titanium stiffness, assuring a 3rd harmonic distortion lower than 0.05% over the whole working frequency range.
The titanium diaphragm is produced in-house and has been developed to assure unmatched transient response. The diaphragm assembly is made joining the former directly to the titanium dome on its upper bend edge. In comparison with a usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature allows proper motion control of the dome in real working conditions. A proprietary treated Nomex former is used as Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200�C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in higher moisture content environments.
The NSD1480N�s powerful neodymium magnet assembly has been designed to obtain 22KGauss in the gap for major benefits in transient response. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effect and distortion. Four top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures.
The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which gives a lower power compression value. Finally, a special treatment is applied to the magnet and the top and back plates of the magnetic structure making the driver more resistant to the corrosive effects of salts and oxidization.

B&C DE 920TN Driver 565,00 EUR

220 W continuous program power capacity

1.4� horn throat diameter

75 mm (3 in) aluminium voice coil

Titanium diaphragm

500 � 18000 Hz response

108.5 dB sensitivity

Neodymium magnet assembly with shorting copper cap

Specifications

Throat Diameter 36 mm (1.4 in)

Nominal Impedance 8 ohm

Minimum Impedance 7.8 ohm

Nominal Power Handling 110 W

Continuous Power Handling 220 W

Sensitivity (1W/1m) 108.5 dB

Frequency Range 0.5 - 18 kHz

Recommended Crossover 1.2 kHz

Voice Coil Diameter 75 mm (3.00 in)

Winding Material Aluminium

Inductance 0.14 mH

Diaphragm material Titanium

Flux Density 2.05 T

Mounting and Shipping info

Overall Diameter 131 mm (5.2 in)

Depth 56 mm (2.2 in)

Net Weight 2.6 kg (5.7 lb)

Shipping Weight 11 kg (24.2 lb)

Shipping Box 300x160x180 mm (11.8x6.3x7.1 in)

B&C DCM 36 Driver 499,00 EUR

160 W continuous program power capacity

1.4� horn throat diameter

400 � 11000 Hz response

108.5 dB sensitivity

Neodymium magnet assembly

Specifications

Throat Diameter 36 mm (1.4 in)

Nominal Impedance 8 ohm

Minimum Impedance 8 ohm

Nominal Power Handling 80 W

Continuous Power Handling 160 W

Sensitivity (1W/1m) 108.5 dB

Frequency Range 0.4 - 11 kHz

Recommended Crossover 400 kHz

Voice Coil Diameter 51 mm (2.00 in)

Winding Material Aluminium

Inductance 0.18 mH

Diaphragm material Composite

Flux Density 2.1 T

Mounting and Shipping info

Overall Diameter 152 mm (6 in)

Depth 108 mm (4.25 in)

Net Weight 3.1 kg (6.8 lb)

Shipping Weight 3.3 kg (7 lb)

Shipping Box 170x170x140 mm (6.7x6.7x5.5 in)

B&C DE 800 Driver 425,00 EUR

220 W continuous program power capacity

1.4� horn throat diameter

75 mm (3 in) aluminium voice coil

Composite Polyimide/Titanium diaphragm

500 � 18000 Hz response

108 dB sensitivity

Neodymium magnet assembly with shorting copper cap

Specifications

Throat Diameter 36 mm (1.4 in)

Nominal Impedance 8 ohm

Minimum Impedance 8 ohm

Nominal Power Handling 110 W

Continuous Power Handling 220 W

Sensitivity (1W/1m) 108 dB

Frequency Range 0.5 - 18 kHz

Recommended Crossover 1.2 kHz

Voice Coil Diameter 75 mm (3.00 in)

Winding Material Aluminium

Inductance 0.14 mH

Diaphragm material Composite Polyimide/Titanium

Flux Density 1.85 T

Mounting and Shipping info

Overall Diameter 124 mm (4.9 in)

Depth 56 mm (2.2 in)

Net Weight 2.3 kg (5.1 lb)

Shipping Weight 9.8 kg (21.5 lb)

Shipping Box 300x160x180 mm (11.8x6.3x7.1 in)

B&C DE 60 TN Driver 211,00 EUR

220 W continuous program power capacity

1.4� horn throat diameter

75 mm (3 in) aluminium voice coil

500 � 18000 Hz response

107 dB sensitivity

Shorting copper cap for extended HF response

Specifications

Throat Diameter 36 mm (1.4 in)

Nominal Impedance 8 ohm

Minimum Impedance 8.6 ohm

Nominal Power Handling 110 W

Continuous Power Handling 220 W

Sensitivity (1W/1m) 107 dB

Frequency Range 0.5 - 18 kHz

Recommended Crossover 1.2 kHz

Voice Coil Diameter 75 mm (3.00 in)

Winding Material Aluminium

Inductance 0.14 mH

Diaphragm material Titanium

Flux Density 1.6 T

Mounting and Shipping info

Overall Diameter 156 mm (6.1 in)

Depth 66 mm (2.6 in)

Net Weight 4.1 kg (9 lb)

Shipping Weight 8.8 kg (19.3 lb)

Shipping Box 210x210x190 mm (8.3x8.3x7.5 in)

B&C DE 610 Driver 238,00 EUR

160 W continuous program power capacity

1.4� horn throat diameter

65 mm (2.5 in) aluminium voice coil

Titanium diaphragm

1000 � 18000 Hz response

108 dB sensitivity

Shorting copper cap for extended HF response

Specifications

Throat Diameter 36 mm (1.4 in)

Nominal Impedance 8 ohm

Minimum Impedance 7.6 ohm

Nominal Power Handling 80 W

Continuous Power Handling 160 W

Sensitivity (1W/1m) 108 dB

Frequency Range 1 - 18 kHz

Recommended Crossover 1.2 kHz

Voice Coil Diameter 65 mm (2.50 in)

Winding Material Aluminium

Inductance 0.15 mH

Diaphragm material Titanium

Flux Density 1.75 T

Mounting and Shipping info

Overall Diameter 156 mm (6.1 in)

Depth 65 mm (2.5 in)

Net Weight 3.8 kg (8.4 lb)

Shipping Weight 8.3 kg (18.3 lb)

Shipping Box 210x210x190 mm (8.3x8.3x7.5 in)

B&C DE 82TN Driver 265,00 EUR

220 W continuous program power capacity

1.4� horn throat diameter

75 mm (3 in) aluminium voice coil

Titanium diaphragm

500 � 18000 Hz response

106.5 dB sensitivity

Shorting copper cap for extended HF response

Specifications

Throat Diameter 36 mm (1.4 in)

Nominal Impedance 8 ohm

Minimum Impedance 8.5 ohm

Nominal Power Handling 110 W

Continuous Power Handling 220 W

Sensitivity (1W/1m) 106 dB

Frequency Range 0.5 - 18 kHz

Recommended Crossover 1 kHz

Voice Coil Diameter 75 mm (3.00 in)

Winding Material Aluminium

Inductance 0.14 mH

Diaphragm material Titanium

Flux Density 1.8 T

Mounting and Shipping info

Overall Diameter 170 mm (6.7 in)

Depth 64 mm (2.5 in)

Net Weight 4.5 kg (9.9 lb)

Shipping Weight 9.6 kg (21.2 lb)

Shipping Box 210x210x190 mm (8.3x8.3x7.5 in)