Artikelsuche
- PA-Chassis
- 1 Zoll Treiber
- 1.4 Zoll Treiber
- 1.5 Zoll Treiber
- 2 Zoll Treiber
- Coax 10"
- Coax 12"
- Coax 15"
- Coax 8"
- Horn 1"
- Horn 1,4"
- Horn 2"
- Lautsprecher 10"
- Lautsprecher 12"
- Lautsprecher 15"
- Lautsprecher 18"
- Lautsprecher 21"
- Lautsprecher 5"
- Lautsprecher 6"
- Lautsprecher 8"
- Line Array Sources
- Treiber & Kalotten BMS
- Treiber & Kalotten Eminence
- Tweeter
- Liebe Kunden, wir machen vom 10.10.2011 bis zum 20.10.2011 Urlaub. Eingegangene...
- Weiter
- RCF NX SERIES Adressiert an lokal agierende Beschallungsfirmen und...
- Weiter
- Die Firma 18-Sound aus Italien hat sich drangemacht und den 18LW1400 "modernisiert"...
- Weiter
- Jetzt Xilica im Angebot ! Wir haben von dem...
- Weiter
- Nach einem etwas längeren "Engpass" ist der DJX-750 wieder verfügbar....
- Weiter
- Neu ++ Kundenstimmen ++ Ab sofort können Sie, wenn Sie ein Artikel bei uns erworben haben...
- Weiter
- Neue Kleinmixer von Soundcraft Notepad - Kompakte Multitalente Die preiswerten Mixer...
- Weiter
- Neues sehr gutes Chassis von Eighteensound. 18 NLW9600. - Tiefbass ohne Ende -...
- Weiter
- Endlich! Der BCD-3000 von behringer ist wieder kurz verfügbar! BCD-3000
- Weiter
Sie sind hier: / PA-Chassis / Lautsprecher 18"
Kunden haben auch ... :
Partner und Siegel
Artikel 16 / 22
Artikeldetails
Keine Bewertungen
18 Sound 18W1300
Art.Nr.: 18S18W1300
18-Sound 18W1300 LF Ferrite Treiber
Keine Bewertungen
Hersteller:
Eighteensound
Sofort lieferbar.
vergleichen
empfehlen
Für die Lieblingsliste bitte einloggen.
Für Merkzettel bitte einloggen.
Für Wunschzettel bitte einloggen.
18 Sound 18W1300
SMALL SPECIFICATIONS
99,5 dB SPL 1W / 1m average sensitivity 100 mm (4 in) Interleaved Sandwich Voice coil (ISV) 1000 W continuous pink noise power handling Weather protected cone and plates for outdoor usage Double Silicon Spider (DSS) for improved excursion control and linearity Double Demodulating Rings (DDR) for lower distortion and improved heat dissipation Improved heat dissipation via unique basket design
The 18W1300 is a low frequency loudspeaker which sets a new industry standard in 18" (460 mm) high output transducers. It represents a further development of the Eighteen Sound 18LW1400 but with a lighter mass and increased sensitivity.
The 18W1300 can be used as a low bass or subwoofer component, in either a reflex, bandpass or horn loaded configuration, in high power fixed or touring loudspeaker systems. It provides clean, linear, undistorted low frequency reproduction at very high power levels. In its reflex configuration, it can also be used for bass musical instrument applications.
The high excursion capabilities of the surround and suspension system, in conjunction with the Double Silicon Spider (DSS), enable the 18W1300 to achieve high levels of linear travel while maintaining full control over the moving mass.
The carbon fiber reinforced curvilinear ribbed cone assures smooth response and exceptional strength with maximum reliability under high mechanical stress.
The state-of-the-art voice coil employs our own Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces. This results in a balanced coil with a uniform distribution of mass and motive energy, creating an extremely linear motor assembly. The already low distortion and unmistakable sound quality of this loudspeaker is improved by Double Demodulating Rings (DDR), designed to dramatically reduce the intermodulation and harmonic distortion while improving the transient response.
Excellent heat dissipation has been achieved by incorporating air channels between the basket and the magnetic top plate.
Maximum flux concentration and force factor in the gap is assured by the unique shape and design of the top and back plates, which have been researched and designed using our in-house magnetic flux FEA CAD resource.
Due to the increasing use of high power audio systems at outdoor events or in marine environments, the 18W1300 has been designed to perform properly under inclement weather conditions. This has been achieved using of an exclusive cone treatment which improves pulp strength and gives water repellent properties to both sides of the cone. In addition, a special treatment is applied to the top and back plates which is far more resistant to the corrosive effects of salts and oxidization than any other treatment in use.
SMALL SPECIFICATIONS
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | 460 mm (18 in) |
| Rated Impedance | 8 Ohm |
| Continuous Pink Noise (1) | 1000 W |
| Continuous Power (2) | 600 W |
| Program Power (3) | 1200 W |
| Peak Power (4) | 6000 W |
| Sensitivity (5) | 99,5 dB |
| Frequency Range (6) | 38 - 3300 Hz |
| Power Compression @-10dB (7) | 0,7 dB |
| Power Compression @-3 dB | 2,1 dB |
| Power Compression @Full Power | 3,2 dB |
| Max Recomm. Frequency | 500 Hz |
| Recomm. Enclosure Volume | 150 ÷ 350 lt. (5,3 ÷ 12,36 cuft) |
| Minimum Impedance | 6,4 Ohm at 25°C |
| Max Peak To Peak Excursion | 50 mm (1,97 in) |
| Voice Coil Diameter | 100 mm (4 in) |
| Voice Coil Winding Material | aluminum |
| Polarity | positive voltage on red terminal gives forward cone motion |
| THIELE SMALL PARAMETERS (8) | |
| Fs | 35 Hz |
| Re | 5 Ohm |
| Sd | 0,1225 sq. mt. (189,88 sq. in.) |
| Qms | 5 |
| Qes | 0,35 |
| Qts | 0,33 |
| Vas | 336 lt. (11,87 cuft) |
| Mms | 129 gr. (0,28 lb) |
| BL | 20,4 Tm |
| Linear Mathematical Xmax (9) | ± 8,5 mm (± 0,33 in) |
| Le (1kHz) | 1,48 mH |
| Ref. Efficiency 1W@1m (half space) | 98,2 dB |
| MOUNTING INFORMATIONS | |
| Overall diameter | 462 mm (18,18 in) |
| N. of mounting holes | 8 |
| Mounting holes diameter | 8,5 mm (0,33 in) |
| Bolt circle diameter | 438-440 mm (17,24-17,32 in) |
| Front mount baffle cutout ø | 416 mm (16,38 in) |
| Rear mount baffle cutout ø | 422 mm (16,61 in) |
| Total depth | 211,9 mm (8,34 in) |
| Flange and gasket thickness | 26 mm (1,02 in) |
| Net weight | 13 kg (28,7 lb) |
| Shipping weight | 14,4 kg (32 lb) |
| CardBoard Packaging dimensions | 482 x 482 x 257 mm (18,98 x 18,98 x 10,12 in) |
The 18W1300 is a low frequency loudspeaker which sets a new industry standard in 18" (460 mm) high output transducers. It represents a further development of the Eighteen Sound 18LW1400 but with a lighter mass and increased sensitivity.
The 18W1300 can be used as a low bass or subwoofer component, in either a reflex, bandpass or horn loaded configuration, in high power fixed or touring loudspeaker systems. It provides clean, linear, undistorted low frequency reproduction at very high power levels. In its reflex configuration, it can also be used for bass musical instrument applications.
The high excursion capabilities of the surround and suspension system, in conjunction with the Double Silicon Spider (DSS), enable the 18W1300 to achieve high levels of linear travel while maintaining full control over the moving mass.
The carbon fiber reinforced curvilinear ribbed cone assures smooth response and exceptional strength with maximum reliability under high mechanical stress.
The state-of-the-art voice coil employs our own Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces. This results in a balanced coil with a uniform distribution of mass and motive energy, creating an extremely linear motor assembly. The already low distortion and unmistakable sound quality of this loudspeaker is improved by Double Demodulating Rings (DDR), designed to dramatically reduce the intermodulation and harmonic distortion while improving the transient response.
Excellent heat dissipation has been achieved by incorporating air channels between the basket and the magnetic top plate.
Maximum flux concentration and force factor in the gap is assured by the unique shape and design of the top and back plates, which have been researched and designed using our in-house magnetic flux FEA CAD resource.
Due to the increasing use of high power audio systems at outdoor events or in marine environments, the 18W1300 has been designed to perform properly under inclement weather conditions. This has been achieved using of an exclusive cone treatment which improves pulp strength and gives water repellent properties to both sides of the cone. In addition, a special treatment is applied to the top and back plates which is far more resistant to the corrosive effects of salts and oxidization than any other treatment in use.
Gerne informieren wir Sie unverbindlich darüber, falls sich der Preis dieses Artikels ändert bzw. Ihrem Wunschpreis entspricht.
Sie müssen angemeldet sein, um einen Kommentar schreiben zu können.
Es liegen keine Kommentare zu diesem Artikel vor.
Aktueller Artikel
18 Sound 18W1300
Art.Nr.: 18S18W1300
18 Sound 18W1300Art.Nr.: 18S18W1300
18-Sound 18W1300 LF Ferrite Treiber
SMALL SPECIFICATIONS 99,5 dB SPL 1W / 1m average sensitivity 100 mm (4 in) Interleaved Sandwich Voice coil (ISV) 1000 W continuous pink noise...
Artikel 16 / 22