Artikelsuche
- PA-Chassis
- 1 Zoll Treiber
- 1.4 Zoll Treiber
- 1.5 Zoll Treiber
- 2 Zoll Treiber
- Coax 10"
- Coax 12"
- Coax 15"
- Coax 8"
- Horn 1"
- Horn 1,4"
- Horn 2"
- Lautsprecher 10"
- Lautsprecher 12"
- Lautsprecher 15"
- Lautsprecher 18"
- Lautsprecher 21"
- Lautsprecher 5"
- Lautsprecher 6"
- Lautsprecher 8"
- Line Array Sources
- Treiber & Kalotten BMS
- Treiber & Kalotten Eminence
- Tweeter
- Liebe Kunden, wir machen vom 10.10.2011 bis zum 20.10.2011 Urlaub. Eingegangene...
- Weiter
- RCF NX SERIES Adressiert an lokal agierende Beschallungsfirmen und...
- Weiter
- Die Firma 18-Sound aus Italien hat sich drangemacht und den 18LW1400 "modernisiert"...
- Weiter
- Jetzt Xilica im Angebot ! Wir haben von dem...
- Weiter
- Nach einem etwas längeren "Engpass" ist der DJX-750 wieder verfügbar....
- Weiter
- Neu ++ Kundenstimmen ++ Ab sofort können Sie, wenn Sie ein Artikel bei uns erworben haben...
- Weiter
- Neue Kleinmixer von Soundcraft Notepad - Kompakte Multitalente Die preiswerten Mixer...
- Weiter
- Neues sehr gutes Chassis von Eighteensound. 18 NLW9600. - Tiefbass ohne Ende -...
- Weiter
- Endlich! Der BCD-3000 von behringer ist wieder kurz verfügbar! BCD-3000
- Weiter
Sie sind hier: / PA-Chassis / Lautsprecher 10"
Partner und Siegel
Artikel 19 / 29
Artikeldetails
Keine Bewertungen
18 Sound 10W400
Art.Nr.: 18S10W400
18-Sound 10W400 LF Ferrite Treiber
Keine Bewertungen
Hersteller:
Eighteensound
Dieser Artikel ist nicht auf Lager und muss erst nachbestellt werden.
vergleichen
empfehlen
Für die Lieblingsliste bitte einloggen.
Für Merkzettel bitte einloggen.
Für Wunschzettel bitte einloggen.
18 Sound 10W400
SMALL SPECIFICATIONS
98 dB SPL 1W / 1m average sensitivity 51 mm (2 in) Interleaved Sandwich Voice coil (ISV) 280 Watt continuous pink noise power handling Ideal for compact two way and multiway systems Improved heat dissipation via unique basket design
The 10W400 is a 400-W-program low frequency driver designed to satisfy the need for a 10" ferrite loudspeaker combining excellent linearity with good sensitivity and power handling characteristics. It is primarily recommended for compact bass reflex systems in enclosures as small as 25 lt.
The paper curvilinear cone is carried by a dampened linen, double half-roll front suspension to control vibration modes. The 8 mm Xmax ensures good travel control and linear excursion.
The 50 mm diameter state-of-the-art, copper wire voice coil employs same technology fitted to our top-of-the-range models, that is our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high force factor or BL.
Another feature of our products, retained in the 10W400 are the fine air channels between the chassis back plate and the top plate of the magnet, which draw heated air out from the voice coil gap and dissipate the energy through the chassis casting.
The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap using our in-house FEA CAD facility.
SMALL SPECIFICATIONS
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | 260 mm (10 in) |
| Rated Impedance | 8 Ohm |
| Continuous Pink Noise (1) | 280 W |
| Continuous Power (2) | 200 W |
| Program Power (3) | 400 W |
| Peak Power (4) | 800 W |
| Sensitivity (5) | 98 dB |
| Frequency Range (6) | 55 ÷ 4500 Hz |
| Power Compression @-10dB (7) | (20 W) 0,7 dB |
| Power Compression @-3dB | (100 W) 1,4 dB |
| Power Compression @Full Power | (200 W) 2,8 dB |
| Max Recomm. Frequency | 2500 Hz |
| Recomm. Enclosure Volume | 20 ÷ 50 lt. (0,71 ÷ 1,77 cuft) |
| Minimum Impedance | 6,1 Ohm at 25°C |
| Max Peak To Peak Excursion | 24 mm (0,94 in) |
| Voice Coil Diameter | 51 mm (2,00 in) |
| Voice Coil Winding Material | aluminum |
| Polarity | positive voltage on red terminal gives forward cone motion |
| THIELE SMALL PARAMETERS (8) | |
| Fs | 70 Hz |
| Re | 5,1 Ohm |
| Sd | 0,035 sq.mt. (54,25 sq.in.) |
| Qms | 3,99 |
| Qes | 0,44 |
| Qts | 0,4 |
| Vas | 31 lt. (1,10 cuft) |
| Mms | 27 gr. (0,06 lb) |
| BL | 11,7 Tm |
| Linear Mathematical Xmax (9) | ± 5,5 mm (± 0,22 in) |
| Le (1kHz) | 1,2 mH |
| Ref. Efficiency 1W@1m (half space) | 96 dB |
| MOUNTING INFORMATIONS | |
| Overall diameter | 260 mm (10,24 in) |
| N. of mounting holes | 8 |
| Mounting holes diameter | 7,15 mm (0,28 in) |
| Bolt circle diameter | 244,5 mm (9,63 in) |
| Front mount baffle cutout ø | 232 mm (9,13 in) |
| Rear mount baffle cutout ø | 232 mm (9,13 in) |
| Total depth | 121,5 mm (4,78 in) |
| Flange and gasket thickness | 14,5 mm (0,57 in) |
| Net weight | 4,7 kg (10,38 lb) |
| Shipping weight | 5,10 kg (11,26 lb) |
| CardBoard Packaging dimensions | 275 x 275 x 164 mm (10,83 x 10,83 x 6,46 in) |
The 10W400 is a 400-W-program low frequency driver designed to satisfy the need for a 10" ferrite loudspeaker combining excellent linearity with good sensitivity and power handling characteristics. It is primarily recommended for compact bass reflex systems in enclosures as small as 25 lt.
The paper curvilinear cone is carried by a dampened linen, double half-roll front suspension to control vibration modes. The 8 mm Xmax ensures good travel control and linear excursion.
The 50 mm diameter state-of-the-art, copper wire voice coil employs same technology fitted to our top-of-the-range models, that is our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high force factor or BL.
Another feature of our products, retained in the 10W400 are the fine air channels between the chassis back plate and the top plate of the magnet, which draw heated air out from the voice coil gap and dissipate the energy through the chassis casting.
The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap using our in-house FEA CAD facility.
Gerne informieren wir Sie unverbindlich darüber, falls sich der Preis dieses Artikels ändert bzw. Ihrem Wunschpreis entspricht.
Sie müssen angemeldet sein, um einen Kommentar schreiben zu können.
Es liegen keine Kommentare zu diesem Artikel vor.
Aktueller Artikel
18 Sound 10W400
Art.Nr.: 18S10W400
18 Sound 10W400Art.Nr.: 18S10W400
18-Sound 10W400 LF Ferrite Treiber
SMALL SPECIFICATIONS 98 dB SPL 1W / 1m average sensitivity 51 mm (2 in) Interleaved Sandwich Voice coil (ISV) 280 Watt continuous pink noise...
Artikel 19 / 29