Artikelsuche
- PA-Chassis
- 1 Zoll Treiber
- 1.4 Zoll Treiber
- 1.5 Zoll Treiber
- 2 Zoll Treiber
- Coax 10"
- Coax 12"
- Coax 15"
- Coax 8"
- Horn 1"
- Horn 1,4"
- Horn 2"
- Lautsprecher 10"
- Lautsprecher 12"
- Lautsprecher 15"
- Lautsprecher 18"
- Lautsprecher 21"
- Lautsprecher 5"
- Lautsprecher 6"
- Lautsprecher 8"
- Line Array Sources
- Treiber & Kalotten BMS
- Treiber & Kalotten Eminence
- Tweeter
- Liebe Kunden, wir machen vom 10.10.2011 bis zum 20.10.2011 Urlaub. Eingegangene...
- Weiter
- RCF NX SERIES Adressiert an lokal agierende Beschallungsfirmen und...
- Weiter
- Die Firma 18-Sound aus Italien hat sich drangemacht und den 18LW1400 "modernisiert"...
- Weiter
- Jetzt Xilica im Angebot ! Wir haben von dem...
- Weiter
- Nach einem etwas längeren "Engpass" ist der DJX-750 wieder verfügbar....
- Weiter
- Neu ++ Kundenstimmen ++ Ab sofort können Sie, wenn Sie ein Artikel bei uns erworben haben...
- Weiter
- Neue Kleinmixer von Soundcraft Notepad - Kompakte Multitalente Die preiswerten Mixer...
- Weiter
- Neues sehr gutes Chassis von Eighteensound. 18 NLW9600. - Tiefbass ohne Ende -...
- Weiter
- Endlich! Der BCD-3000 von behringer ist wieder kurz verfügbar! BCD-3000
- Weiter
Sie sind hier: / PA-Chassis / Lautsprecher 10"
Partner und Siegel
Artikel 24 / 29
Artikeldetails
Keine Bewertungen
18 Sound 10NMB420
Art.Nr.: 18S10NMB420
18-Sound 10NMB420 High Ouput MB Neodymium Treiber
Keine Bewertungen
Hersteller:
Eighteensound
Sofort lieferbar.
vergleichen
empfehlen
Für die Lieblingsliste bitte einloggen.
Für Merkzettel bitte einloggen.
Für Wunschzettel bitte einloggen.
18 Sound 10NMB420
SMALL SPECIFICATIONS
99 dB SPL 1W / 1m average sensitivity 65 mm (2.5 in) Interleaved Sandwich Voice coil (ISV) 350 W continuous pink noise power handling External neodymium magnet assembly Single Demodulating Ring (SDR) for lower distortion Weather protected cone and plates for outdoor usage Specially designed for line arrays and compact two way systems
The 10NMB420 neodymium transducer has been developed in response to a specific market requirement for a 10” midbass driver that combines excellent linearity with good efficiency and high power handling capabilities.
The 10NMB420 is primarily intended for use as a midbass driver in line-arrays as well as high quality 2-way or multiway reflex enclosures. The low pass filter might be positioned as high as 2000Hz.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio.
The 65mm Ø state-of-the-art, aluminum wire voice coil employs Interleaved Sandwich Voice coil (ISV) technology. It is composed by a high strength fiberglas former used to carry windings on both the outer and inner surfaces, in order to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high BL force factor.
The voice coil is cooled through airways placed between the chassis back plate and the magnet faceplate. In this way heated air is channeled away from the voice coil and the gap.
Another technology present into the 10NMB420 is the SDR (Single Demodulating Ring), used to reproduce instantaneous peak on mid frequencies, reducing intermodulation distortion.
Thanks to the increasing use during outdoor audio events, the ability to perform in humid environments is an extra key feature of the 10NMB420. This is achieved trough an exclusively developed cone treatment which renders the cone humidity repellent while does not increasing the total moving speaker mass.
SMALL SPECIFICATIONS
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | 260mm (10,2 in) |
| Rated Impedance | 16 Ohm |
| Continuous Pink Noise (1) | 350 W |
| Continuous Power (2) | 250 W |
| Program Power (3) | 500 W |
| Peak Power (4) | 1000 W |
| Sensitivity (5) | 99 dB |
| Frequency Range (6) | 65 ÷ 5000 Hz |
| Power Compression @-10dB (7) | (25 W) 0,8 dB |
| Power Compression @-3dB | (125 W) 2,2 dB |
| Power Compression @Full Power | (250 W) 2,9 dB |
| Max Recomm. Frequency | 2000 Hz |
| Recomm. Enclosure Volume | 10 ÷ 40 lt. (0,35 ÷ 1,41 cuft) |
| Minimum Impedance | 11,9Ohm at 25°C |
| Max Peak To Peak Excursion | 25 mm (1 in) |
| Voice Coil Diameter | 65 mm (2,56 in) |
| Voice Coil Winding Material | aluminum |
| THIELE SMALL PARAMETERS (8) | |
| Fs | 65 Hz |
| Re | 10,5 Ohm |
| Sd | 0,0346 sq.mt. (53,6 sq.in.) |
| Qms | 4,6 |
| Qes | 0,36 |
| Qts | 0,33 |
| Vas | 30 lt. (1,06 cu.ft.) |
| Mms | 31,5 gr. (0,07 lb) |
| BL | 19,5 Tm |
| Linear Mathematical Xmax (9) | ± 4 mm (±0,16 in) |
| Le (1kHz) | 0,4 mH |
| Ref. Efficiency 1W@1m (half space) | 96 dB |
| MOUNTING INFORMATIONS | |
| Overall diameter | 260 mm (10,24 in) |
| N. of mounting holes | 8 |
| Mounting holes diameter | 7 mm (0,27 in) |
| Bolt circle diameter | 244 mm (9,6 in) |
| Front mount baffle cutout ø | 232 mm (9,1 in) |
| Rear mount baffle cutout ø | 232 mm (9,1 in) |
| Total depth | 122 mm (4,8 in) |
| Flange and gasket thickness | 11 mm (0,43 in) |
| Net weight | 3 kg (6,6 lb) |
| Shipping weight | 3,5 kg (7,7 lb) |
| CardBoard Packaging dimensions | 275 x 275 x 164 mm (9,25 x 9,25 x 5,91 in) |
The 10NMB420 neodymium transducer has been developed in response to a specific market requirement for a 10” midbass driver that combines excellent linearity with good efficiency and high power handling capabilities.
The 10NMB420 is primarily intended for use as a midbass driver in line-arrays as well as high quality 2-way or multiway reflex enclosures. The low pass filter might be positioned as high as 2000Hz.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio.
The 65mm Ø state-of-the-art, aluminum wire voice coil employs Interleaved Sandwich Voice coil (ISV) technology. It is composed by a high strength fiberglas former used to carry windings on both the outer and inner surfaces, in order to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high BL force factor.
The voice coil is cooled through airways placed between the chassis back plate and the magnet faceplate. In this way heated air is channeled away from the voice coil and the gap.
Another technology present into the 10NMB420 is the SDR (Single Demodulating Ring), used to reproduce instantaneous peak on mid frequencies, reducing intermodulation distortion.
Thanks to the increasing use during outdoor audio events, the ability to perform in humid environments is an extra key feature of the 10NMB420. This is achieved trough an exclusively developed cone treatment which renders the cone humidity repellent while does not increasing the total moving speaker mass.
Gerne informieren wir Sie unverbindlich darüber, falls sich der Preis dieses Artikels ändert bzw. Ihrem Wunschpreis entspricht.
Sie müssen angemeldet sein, um einen Kommentar schreiben zu können.
Es liegen keine Kommentare zu diesem Artikel vor.
Aktueller Artikel
18 Sound 10NMB420
Art.Nr.: 18S10NMB420
18 Sound 10NMB420Art.Nr.: 18S10NMB420
18-Sound 10NMB420 High Ouput MB Neodymium Treiber
SMALL SPECIFICATIONS 99 dB SPL 1W / 1m average sensitivity 65 mm (2.5 in) Interleaved Sandwich Voice coil (ISV) 350 W continuous pink noise...
Artikel 24 / 29