Artikelsuche
- PA-Chassis
- 1 Zoll Treiber
- 1.4 Zoll Treiber
- 1.5 Zoll Treiber
- 2 Zoll Treiber
- Coax 10"
- Coax 12"
- Coax 15"
- Coax 8"
- Horn 1"
- Horn 1,4"
- Horn 2"
- Lautsprecher 10"
- Lautsprecher 12"
- Lautsprecher 15"
- Lautsprecher 18"
- Lautsprecher 21"
- Lautsprecher 5"
- Lautsprecher 6"
- Lautsprecher 8"
- Line Array Sources
- Treiber & Kalotten BMS
- Treiber & Kalotten Eminence
- Tweeter
- Liebe Kunden, wir machen vom 10.10.2011 bis zum 20.10.2011 Urlaub. Eingegangene...
- Weiter
- RCF NX SERIES Adressiert an lokal agierende Beschallungsfirmen und...
- Weiter
- Die Firma 18-Sound aus Italien hat sich drangemacht und den 18LW1400 "modernisiert"...
- Weiter
- Jetzt Xilica im Angebot ! Wir haben von dem...
- Weiter
- Nach einem etwas längeren "Engpass" ist der DJX-750 wieder verfügbar....
- Weiter
- Neu ++ Kundenstimmen ++ Ab sofort können Sie, wenn Sie ein Artikel bei uns erworben haben...
- Weiter
- Neue Kleinmixer von Soundcraft Notepad - Kompakte Multitalente Die preiswerten Mixer...
- Weiter
- Neues sehr gutes Chassis von Eighteensound. 18 NLW9600. - Tiefbass ohne Ende -...
- Weiter
- Endlich! Der BCD-3000 von behringer ist wieder kurz verfügbar! BCD-3000
- Weiter
Sie sind hier: / PA-Chassis / Lautsprecher 10"
Partner und Siegel
Artikel 21 / 29
Artikeldetails
Keine Bewertungen
18 Sound 10MB600
Art.Nr.: 18S10MB600
18-Sound 10MB600 High Output MB Ferrite Treiber
Keine Bewertungen
Hersteller:
Eighteensound
Sofort lieferbar.
vergleichen
empfehlen
Für die Lieblingsliste bitte einloggen.
Für Merkzettel bitte einloggen.
Für Wunschzettel bitte einloggen.
18 Sound 10MB600
SMALL SPECIFICATIONS
98 dB SPL 1W / 1m average sensitivity 75 mm (3 in) Interleaved Sandwich Voice coil (ISV) 450 W continuous pink noise power handling Weather protected cone and plates for outdoor usage Excellent transient response Ideal for compact two way and multiway systems Improved heat dissipation via unique basket design
The 10MB600 mid-bass transducer represents a development of the 10M600 midrange, combining excellent linearity with high efficiency and high power handling capabilities. The 10MB600 is primarily intended for use as a midbass driver in extremely compact 2-way reflex enclosures between 10 and 40 lt.
Its curvilinear paper cone is formed using a special high strength wood pulp, designed to achieve the best possible rigidity and stiffness. An exclusive treatment is also applied to the cone to increase its water repellent properties.
The 75 mm state-of-the-art voice coil is similar to those fitted to our top-of-the-range 18" and 15" models but it is wound with aluminum wire. The coil also employs our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil, resulting in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
The voice coil cooling is achieved using airways between the chassis back plate and the face plate of the magnet which allow heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. This technology is a result of 3D CAD resource application by our engineers.
The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap also using our in-house FEA CAD facility.
In addition, a special treatment is applied to the top and back plates making the transducer far more resistant to the corrosive effects of salts and oxidization. Hence, the equipment is able to perform outdoors in inclement weather conditions.
SMALL SPECIFICATIONS
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | 260 mm (10 in) |
| Rated Impedance | 8 Ohm |
| Continuous Pink Noise (1) | 450 W |
| Continuous Power (2) | 350 W |
| Program Power (3) | 700 W |
| Peak Power (4) | 1500 W |
| Sensitivity (5) | 98 dB |
| Frequency Range (6) | 55 ÷ 4500 Hz |
| Power Compression @-10dB (7) | (35 W) 0,4 dB |
| Power Compression @-3dB | (175 W) 1,6 dB |
| Power Compression @Full Power | (350 W) 2,2 dB |
| Max Recomm. Frequency | 2500 Hz |
| Recomm. Enclosure Volume | 10 ÷ 40 lt. (0,9 ÷ 1,41 cuft) |
| Minimum Impedance | 6,4 Ohm at 25°C |
| Max Peak To Peak Excursion | 24 mm (0,94 in) |
| Voice Coil Diameter | 75 mm (2,95 in) |
| Voice Coil Winding Material | aluminum |
| Polarity | positive voltage on red terminal gives forward cone motion |
| THIELE SMALL PARAMETERS (8) | |
| Fs | 58 Hz |
| Re | 5,7 Ohm |
| Sd | 0,035 sq.mt. (54,25 sq.in.) |
| Qms | 5,5 |
| Qes | 0,23 |
| Qts | 0,22 |
| Vas | 33,4 lt. (1,18 cuft) |
| Mms | 38 gr. (0,08 lb) |
| BL | 18,6 Tm |
| Linear Mathematical Xmax (9) | ± 6,5 mm (± 0,26 in) |
| Le (1kHz) | 1,6 mH |
| Ref. Efficiency 1W@1m (half space) | 96,5 dB |
| MOUNTING INFORMATIONS | |
| Overall diameter | 260 mm (10,24 in) |
| N. of mounting holes | 8 |
| Mounting holes diameter | 7,15 mm (0,28 in) |
| Bolt circle diameter | 244,5 mm (9,63 in) |
| Front mount baffle cutout ø | 232 mm (9,13 in) |
| Rear mount baffle cutout ø | 232 mm (9,13 in) |
| Total depth | 127 mm (5 in) |
| Flange and gasket thickness | 14,5 mm (0,57 in) |
| Net weight | 7,35 kg (16,23 lb) |
| Shipping weight | 7,9 kg (17,44 lb) |
| CardBoard Packaging dimensions | 275 x 275 x 164 mm (10,83 x 10,83 x 6,46 in) |
The 10MB600 mid-bass transducer represents a development of the 10M600 midrange, combining excellent linearity with high efficiency and high power handling capabilities. The 10MB600 is primarily intended for use as a midbass driver in extremely compact 2-way reflex enclosures between 10 and 40 lt.
Its curvilinear paper cone is formed using a special high strength wood pulp, designed to achieve the best possible rigidity and stiffness. An exclusive treatment is also applied to the cone to increase its water repellent properties.
The 75 mm state-of-the-art voice coil is similar to those fitted to our top-of-the-range 18" and 15" models but it is wound with aluminum wire. The coil also employs our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil, resulting in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
The voice coil cooling is achieved using airways between the chassis back plate and the face plate of the magnet which allow heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. This technology is a result of 3D CAD resource application by our engineers.
The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap also using our in-house FEA CAD facility.
In addition, a special treatment is applied to the top and back plates making the transducer far more resistant to the corrosive effects of salts and oxidization. Hence, the equipment is able to perform outdoors in inclement weather conditions.
Gerne informieren wir Sie unverbindlich darüber, falls sich der Preis dieses Artikels ändert bzw. Ihrem Wunschpreis entspricht.
Sie müssen angemeldet sein, um einen Kommentar schreiben zu können.
Es liegen keine Kommentare zu diesem Artikel vor.
Aktueller Artikel
18 Sound 10MB600
Art.Nr.: 18S10MB600
18 Sound 10MB600Art.Nr.: 18S10MB600
18-Sound 10MB600 High Output MB Ferrite Treiber
SMALL SPECIFICATIONS 98 dB SPL 1W / 1m average sensitivity 75 mm (3 in) Interleaved Sandwich Voice coil (ISV) 450 W continuous pink noise...
Artikel 21 / 29